Korg Pa300, User Manual

Page: 146 / 378

142 Sequencer
Song Edit: Cut/Insert Measures
Curve
(Only available in Advanced mode). Use this parameter to select
one of the six curves, and to specify how the velocity will change
over time.
Start / End Vel. Value
(Only available in Advanced mode). Velocity change at the start-
ing and ending ticks of the selected range.
0…100 Velocity change in percentage.
Song Edit: Cut/Insert Measures
In this page you can cut or insert measures from the Song.
After selecting the Start and Length parameters, touch Execute
to start the operation.
After the Cut, the following measures are moved back, to fill the
cut measures.
After the Insert, the following measures are pushed forward to
accommodate the inserted measures.
Start
First measure where to begin cutting/inserting.
Length
Number of measures to be cut/inserted.
Meter
Meter (time signature) of the measures to be inserted.
Song Edit: Delete
This page is where you can delete MIDI events from the Song.
After setting the various parameters, touch Execute to start the
operation.
Track
Use this parameter to select a track.
All All tracks selected.
Track 1…16 Selected track.
Master Master track. This is where the Tempo, Scale and
Effect events are recorded.
Event
Type of MIDI event to delete.
All All events. Measures will not be removed from
the Song, and will remain empty.
Note All notes in the selected range.
Dup.Note All duplicate notes. When two notes with the
same pitch are encountered on the same tick, the
one with the lowest velocity is deleted.
After Touch After Touch events.
Pitch Bend Pitch Bend events.
Prog.Change Program Change events, excluding the bundled
Control Change #00 (Bank Select MSB) and #32
(Bank Select LSB).
Ctl.Change All Control Change events, for example Bank
Select, Modulation, Damper, Soft Pedal…
CC00/32…CC127
Single Control Change events. Double Control
Change numbers (like 00/32) are MSB/LSB bun-
dles.
Start / End Tick
Use these parameters to set the starting and ending points of the
range to edit.
If you wish to select a four-measure sequence starting at the
beginning of the Song, the Start will be positioned at 1.01.000,
and the End at 5.01.000.
Bottom / Top Note
Use these parameters to set the bottom and top of the keyboard
range to delete. If you select the same note as the Bottom and
Start
Value
Curve 1
Velocity
Start Value = 0%, End Value = 100%
127
1
End
Value Start
Value
Curve 2
Velocity
127
1
End
Value Start
Value
Curve 3
Velocity
127
1
End
Value
Start
Value
Curve 4
Velocity
127
1
End
Value Start
Value
Curve 5
Velocity
127
1
End
Value Start
Value
Curve 6
Velocity
RANDOM
127
1
End
Value
Pa300 User Manual v150 (English).book Page 142 Saturday, March 29, 2014 5:29 PM