Korg PA1X, User Manual, Page: 118 / 424

114
Style Record mode
Event Edit: Filter
Event Edit: Filter
This page is where you can select the event types to be shown in
the Event Edit page.
Turn On the filter for all event types you do not wish to see in
the Event Edit page.
Note: Some of the events are “ghosted”, and non editable, since the
corresponding events are not editable in a Style.
Note/RX Noise
Notes and RX Noises.
Control Control Change events. Only the following Con-
trol Change numbers are allowed with Styles.
Tempo/Meter Tempo and Meter changes (Master Track only).
Pitch Bend Pitch Bend events.
Style Edit: Quantize
The quantize function may be used to correct any timing mis-
take after recording, or to give the pattern a “groovy” feeling.
After setting the various parameters, press Execute.
Track
Use this parameter to select a track.
All All tracks selected.
Drum…Acc5 Selected track.
E / CV (Style Element/Chord Variation)
Use these parameters to select the Style Element and Chord Vari-
ation for editing.
Resolution
This parameter sets the quantization after recording. For exam-
ple, when you select 1/8, all notes are moved to the nearest 1/8
division. When you select 1/4, all notes are moved to the nearest
1/4 division.
(1/32)… (1/4)
Grid resolution, in musical values. A “b…f ” char-
acter added after the value means swing-quanti-
zation. A “3” means triplet.
Start / End Tick
Use these parameters to set the starting and ending points of the
range to quantize.
If a Chord Variation is four measures long, and you want to
select it all, the Start will be positioned at 1.01.000, and the End
at 5.01.000.
Bottom / Top Note
Use these parameters to set the bottom and top of the keyboard
range to quantize. If you select the same note as the Bottom and
Top parameters, you can select a single percussive instrument in
a Drum or Percussion track.
Control function CC# (Control Change Number)
Modulation 1 1
Modulation 2 2
Pan 10
Expression
(a)
(a). Expression events cannot be inserted at the starting Position
(001.01.000). An Expression value is already among the default
“header” parameters of the Style Element.
11
CC#12 12
CC#13 13
Damper 64
Filter Resonance 71
Low Pass Filter Cutoff 74
CC#80 80
CC#81 81
CC#82 82
No quanti-
zation
1/8
1/4