26
|
Connecting an external controller with an X/Y pad to
control sound parameters
By connecting an external controller with an X/Y pad (for example, the KORG
nanoPAD2 or padKONTROL) you can control specific parameters of the
sound, like Brightness or Resonance, or both at the same time.
Configure the external controller
1
Program the external controller to send data on the MIDI channel corre-
sponding to the Sound you wish to control. For example, use MIDI channel 1,
usually the default.
With the nanoPAD2 and devices of the same series, you can choose a trans-
mission MIDI channel by using the KORG KONTROL Editor software, that you
can freely download from our
.
In the editor, press the
Global
button to open the
Global
dialog, and go to
the
X-Y Pad
page.
In the following image, you can see how the nanoPAD2’s Global channel has
been set to MIDI channel 1.
