Korg PA 600 Quick Manual Download

Page: 56 / 96

Selecting and playing Styles

Adjusting the volume of the separate tracks

Adjusting the volume of the separate tracks

You can adjust the volume of each of the Style and Keyboard tracks, for example to soften the bass a
little, or to make the keyboard solo louder.

Touch the Volume tab to see the Volume panel.

Hold & drag the Virtual Sliders in the display to adjust each Keyboard track’s volume.

To separately adjust each Style track, press the TRACK SELECT button to change the
track’s view.

Hint:

As an alternative,

you can change each track’s
volume, by touching a track’s
area to select it, then using
the VALUE dial to change the
volume.

To return to the Keyboard Tracks view, press the TRACK SELECT button again.

In Style view, all separate

Style tracks are shown, and

their volume can be

adjusted by dragging the

corresponding sliders.

Summary of Contents for PA 600
































































































Search results

Summary of Contents for PA 600

Reviews:

Related manuals for PA 600

Brands by name

Popular brands

Korg PA 600, Quick Manual

Search results

Summary of Contents for PA 600

Reviews:

Related manuals for PA 600

Brands by name

Popular brands