Korg NAUTILUS Series, Parameter Manual, Page: 838 / 961

828
073: Organ Vibrato/Chorus
This effect simulates the chorus and vibrato circuitry of a
vintage organ. The modulation speed and depth can be
customized.
This effect works the same as the Chorus/Vibrato included in
the CX-3. For more information, see “7–1c: Vibrato/Chorus”
on page 197.
CONTROL
Input Trim [0…100]
Sets the input level.
Mode [Preset, Custom]
Selects either preset or custom settings.
PRESET
Type [V1, C1, V2, C2, V3, C3]
Selects the effect type when Mode=Preset.
V1/V2/V3 are variations of vibrato, and C1/C2/C3 are
variations of chorus.
Source [Off…Tempo]
Selects the modulation source that will change the effect
type.
Amount [–5…+5]
Sets the modulation amount for changing the effect type.
CUSTOM
Mix [0…100]
Sets the mix level of the direct sound when Mode=Preset.
Source [Off…Tempo]
Selects the modulation source that will control the mix level
of the direct sound.
Amount [+/–100]
Sets the modulation amount for controlling the mix level of
the direct sound.
Depth [0…100]
Sets the vibrato depth.
Source [Off…Tempo]
Selects the modulation source that will control vibrato depth.
Amount [+/–100]
Sets the modulation amount for controlling the vibrato
depth.
Speed [Hz] [0.02…20.00]
Sets the vibrato speed.
Source [Off…Tempo]
Selects the modulation source for controlling the vibrato
speed.
Amount [–20.00…+20.00]
Sets the modulation amount for controlling the vibrato
speed.
OUTPUT
This is the standard effects output section, with modulatable
control over wet/dry balance. For more information, see
“OUTPUT” on page 762.
074: Rotary Speaker
This effect simulates a rotary speaker, and obtains a more
realistic sound by simulating the rotor in the low range and
the horn in the high range separately. The effect also
simulates the stereo microphone settings.
Rotary Speaker speed indicator
In PROGRAM, COMBINATION, SEQUENCER, and SET
LIST modes, if there is an active Rotary Speaker, its current
state (Fast, Slow, or Stop) is shown at the top of the display.
This includes both CX-3 Programs and any Rotary Speaker
effects. If there are two or more active Rotary Speakers, the
state of the fastest one is shown. For instance, if a
Combination has three CX-3 Programs, whose current states
are Fast, Slow, and Stop respectively, the menu bar will
show Fast.
CONTROL
Mode Switch [Rotate, Stop]
Switches between speaker rotation and stop.
Source [Off…Tempo]
Selects a modulation source for Rotate/Stop.
+
Vibrato/Chorus
Mode
Preset Setting
Custom Parameters
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
D -mod
D -mod
D -mod
Mode Switch: Rotate/Stop
Speed Switch: Slow/Fast
Manual Speed Control
Speaker Simulation
Mic Distance
Mic Spread
Horn/Rotor
Balance
Horn
Rotary Speaker
Rotor
+