Korg NAUTILUS Series, Parameter Manual, Page: 626 / 961

SAMPLING mode
616
Paste
When you execute this command, the sample data placed in
the buffer by executing
Copy in the SAMPLING mode
Sample Edit page will be placed in the sample starting at the
Start address. The original data will be deleted, and
overwritten by the sample data from the buffer.
You can also place sample data into a blank sample. This is
convenient when you wish to
Copy part of a sample and
create a new sample based on it.
Pasting to a sample that contains sample data
1. Use Sample Select (1–1b) to select the sample that you
wish to edit, and set Start to specify the starting
address. The End setting is ignored.
2. Select “Paste” to open the dialog box.
3. To Start will indicate the starting address at which the
data will be pasted.
4. In Save to No., specify the save destination sample
number. By default, an unused sample number will be
selected.
If Overwrite is checked, the sample number will be fixed
to the current sample, and cannot be changed. See “About
Overwrite” on page 605.
For stereo samples, use “Save to No.(L)” and
“(R)” to specify the save-destination of the L and R
channels.
5. To execute the Paste command, press the OK button.
To cancel, press the Cancel button.
If the buffer into which data was placed by the Copy
command contains no data, the display will indicate
“Source sample is empty.”
Pasting to a sample that contains no sample data
1. Select the vacant sample number that you wish to
paste.
If you select ----:---No Assign---- for Sample Select and
then open the dialog box for this command, a vacant
sample number will be selected automatically.
The Start and End settings will be ignored, and will have
no effect. The beginning of the sample will be placed at
address 0.
2. Select “Paste” to open the dialog box.
3. In Save to No., specify the save destination sample
number. If you wish to change it, re-specify the
desired number.
For stereo samples, use “Save to No.(L)” and
“(R)” to specify the save-destination of the L and R
channels.
4. To execute the “Paste” command, press the OK
button. To cancel without executing, press the Cancel
button.
Insert Zero
This command inserts zero-level sample data (silence),
beginning at the
Start address. The data that previously
occupied that location will be moved toward the end of the
sample.
1. Use Sample Select (1–1b) to select the sample that you
wish to edit, and set Start to specify the starting
address. The End setting is ignored.
2. Select “Insert Zero” to open the dialog box.
3. To Start will indicate the starting address at which the
data will be inserted.
4. In “Size,” specify the length of the data that will be
inserted.
5. In Save to No., specify the save destination sample
number. By default, an unused sample number will be
selected.
If Overwrite is checked, the sample number will be fixed
to the current sample, and cannot be changed. See “About
Overwrite” on page 605.
For stereo samples, use “Save to No.(L)” and
“(R)” to specify the save-destination of the L and R
channels.
6. To execute the Insert Zero command, press the OK
button. To cancel, press the Cancel button.
From the buffer
Size