Korg NAUTILUS Series, Parameter Manual, Page: 486 / 961

SEQUENCER mode
476
1–8: Controllers
Here you can set the Sequencer functions of the SW1 button,
SW2 button, and the RT control knobs 1–6. These settings
are made independently for each song.
When you operate these buttons and knobs during recording,
the MIDI messages assigned to them will be recorded.
1–8a: Knob
Here you can assign the function of the RT control knobs 1
through 6. Most of the functions that can be assigned are
control changes. For more information, please see “RT
Control Knobs 1–6 Assignments” on page 914.
The functions you assign here are performed when you
select USER by using SELECT button and operate RT
control knobs 1 through 6. For more information, please see
“1–8a: RT Control Knob Assign” on page 48.
1–1a
1–8PMC
1–8a
1–8b