Korg NAUTILUS Series, Parameter Manual, Page: 426 / 961

COMBINATION mode
416
3–3: MIDI Filter3
3–3a: MIDI Filter3
Timbre 01
Enable SW1 [Off, On]
Enable SW2 [Off, On]
Specifies whether or not the effect of the SW1 and SW2
switches will be received.
The function of these switches is specified in the EQ/X-
Y/Controllers– Controllers page.
These settings are valid if these keys are assigned to SW1
Mod. (CC#80), SW2 Mod. (CC#81), or Portamento SW
(CC#65).
Enable Foot Switch [Off, On]
Specifies whether or not the effect of the ASSIGNABLE
SWITCH will be received. The function is assigned in
GLOBAL > Controllers/Scales page.
This filter setting is valid when a MIDI control change is
assigned.
Enable Foot Pedal [Off, On]
Specifies whether or not the effect of the ASSIGNABLE
PEDAL will be received. The function is assigned in
GLOBAL > Controllers/Scales page.
This filter setting is valid when a MIDI control change is
assigned.
Enable Other Control Change Messages [Off, On]
Specifies whether or not MIDI control messages not covered
in the preceding items MIDI Filter will be received.
Timbres 02…16
These are the MIDI Filter3 settings for timbres 2 through 16.
They are the same as for timbre 1. See “Timbre 01”.
v 3–3: Page Menu Commands
• Compare → p.112
• Write Combination → p.433
• Exclusive Solo → p.113
• Copy From Program → p.433
• PAGE → p.126
• MODE → p.126
3–3PMC
3–3a
1–1a
1–1b