Korg NAUTILUS Series, Parameter Manual, Page: 309 / 961

MOD-7 Overview Using the Parameter Details area
299
Using the Parameter Details area
Overview
The LCD displays are divided into two sections. The first is
the main part of the display, which includes all of the major
MOD-7 parameters. This provides quick access to different
functions, and an easy-to-read overview of the current
settings.
The other section is the Parameter Details area, located in the
upper right-hand part of the screen. This area shows
information for the selected parameter, such as descriptive
graphics and AMS assignments.
Assigning AMS modulation
Parameters which have AMS modulation shown only in the
Parameter Details area are marked with either a black “D” or
a white “D” (for “Details”) and an arrow. The black “D”
indicates that the Parameter Details area includes the
possibility of AMS modulation, but that none is assigned;
the white “D” and arrow show that an AMS source is already
assigned
To edit AMS settings in the Parameter Details area:
1. Touch the parameter in the main area of the display.
If the parameter supports AMS modulation, the Parameter
Details area will show one or more AMS sources and
intensities.
2. Edit the AMS settings in the Parameter Details area.
Note that AMS can often modulate parameters outside the
range of the stored values, as if you were pushing the
parameter beyond the ends of the knob.
Main
area
Parameter
Details area