Korg NAUTILUS Series, Parameter Manual, Page: 159 / 961

PROGRAM > AL-1: OSC/Pitch 4–3: Mixer
149
AMS [List of AMS Sources]
This selects an AMS source to control the Oscillator 1
Balance . For a list of AMS sources, see “Alternate
Modulation Source (AMS) List” on page 901.
Intensity [–99…+99]
This controls the depth and direction of the Oscillator 1
Balance AMS modulation.
Phase Invert [Off, On]
This inverts the phase of Oscillator 1.
4–3b: OSC2
Oscillator 2 has the same mixer parameters as described
under “4–3a: OSC1,” above.
4–3c: Sub OSC/Audio Input
In addition to the Level, Balance, AMS, and Phase Invert
parameters described under “4–3a: OSC1,” above, this
section has controls for using an external audio input.
Mode [Sub OSC, External Audio Input]
This selects whether the mixer input will be used for the Sub
Oscillator, or the audio input selected below.
External Audio [Audio Inputs 1, 2, USB 1, 2]
This selects the audio input used for both this mixer channel
and the Ring Modulator.
The Ring Modulator can use the selected audio input even if
Mode , above, is set to Sub OSC .
4–3d: Ring Mod
The Ring Modulator has the same mixer parameters as
described under “4–3a: OSC1,” above.
4–3e: Noise
The Noise Generator has the same mixer parameters as
described under “4–3a: OSC1,” above.
v 4–3: Page Menu Commands
• Compare → p.112
• Write Program → p.112
• Exclusive Solo → p.113
• PAGE → p.126
• MODE → p.126