5
Gate arpeggiator
When the Touch Scale mode is “on”
The gate arpeggiator will apply only to the touch scale function.
The gate arpeggiator does not apply to the trigger pads.
Note number
Gate arpeggiator is enabled
Gate time
Gate arpeggiator does not apply
X-axis: Note number
Note messages are transmitted according to the scale, key, note range, and octave shift settings that you’ve specified.
Y-axis: Gate time
This specifies the duration of the notes.
Note durations will be shorter at the bottom of the pad, and will lengthen as you move upward on the pad.
At the top edge of the pad, notes will be legato.
Summary of Contents for nanoPad2
Page 1: ......
