12
Playing
Turning the power on/off
and adjusting the volume
a. Turn on the power
Before turning on the power of the MS2000/MS2000R, turn
off the power of the connected devices.
1
Rotate the [POWER/VOLUME] knob to turn on the
power.
The Program Play mode screen will appear.
When the power is first turned on, you will always be in
Program Play mode.
The upper line of the LCD will show the bank, number,
and name of the program. The lower line will show the
voice mode of the program, and the tempo.
2
Turn on the power of the connected devices.
b. Adjust the volume
●
Rotate the [POWER/VOLUME] knob to an appropriate
level.
The headphone volume is also adjusted by this knob.
c. Turn off the power
1
Turn off the power of the connected devices.
2
Rotate the [POWER/VOLUME] knob all the way to the
left.
Rotate it until it clicks off.
The power of the MS2000/MS2000R will be off.
Listen to the demo perfor-
mance
The MS2000/MS2000R contains several demo songs. Listen
to the demo songs to hear the rich sounds and their expres-
sive potential.
a. Play back the demo songs
●
Hold down the [EXIT] key and the [GLOBAL] key for
approximately one second.
Hold down the [EXIT] key, and then press and hold the
[GLOBAL] key.
The demo songs will begin playing consecutively, start-
ing with the first song.
The LCD screen will show the song name.
b. Select a demo song
●
During playback, use the [+/YES] [–/NO] keys.
The demo song will change.
The LCD screen will indicate the name of the selected
demo song.
c. Exit the demo performance
●
Press the [EXIT] key.
You will return to Program Play mode.
All demo songs: © 2000 korg Inc. — all rights reserved.
Program bank and number
Program
name
Tempo
Voice mode
Single
=120
A01:MS2000/R
= DEMO SONG #1 =
Demo Song No.1
Summary of Contents for MS2000
Page 1: ...2 E ...
