Korg MMT RADIAS, Owner'S Manual, Page: 117 / 176

111
Drum parameters
These are the parameters for drum kits and drum instru-
ments.
To edit these parameters, press the [DRUM] button and
then press the [EDIT] button.
1. Name
P01 NAME
P01–1: KIT (Drumkit Name)
1: Name [space, !… ’ ]
Specifies the name of the drum kit. The available charac-
ters and the procedure are the same as for a program.
For details, refer to p.35 “How to assign a name.”
P01–2: INST (Drum Instrument Name)
To select the drum instrument whose name you want to
edit, set 16KEYS [SELECT] to PROGRAM, and use the
[1]–[16] keys to select a drum instrument.
1: Name [space, !…
’
]
Specifies the name of the drum instrument. The avail-
able characters and the procedure are the same as for a
program.
For details, refer to p.35 “How to assign a name.”
2. Drum Common
P02 COMMON
P02–1: DRUM MAP
Here you can create a drum kit by assigning drum in-
struments to separate notes of the keyboard.
For details on making these assignments, refer to p.62
“Assigning a note number to a drum instrument.”
0: Load [01-01…32-16, Tmp001…Tmp128]
Loads parameter settings from drum instruments of a
drum kit or from a sound template. Use the cursor [
π
/
√
] button to move the cursor, and use the [PROGRAM/
VALUE] dial to select a drum instrument or template.
1: PlayNote [C-1…G9]
Selects the keyboard note to which the instrument se-
lected by “INST No.” will be assigned.
If you assign two or more drum instruments to
one note, these drum instruments will all sound si-
multaneously when you play that note.
2: ExAssign [Off, Group1, Group2]
Groups the drum instruments assigned to the keyboard.
If instruments are grouped, only one instrument in that
group can sound at any one time, with priority given to
the last-pressed note. This is effective for sounds such as
hi-hat open and hi-hat closed, which normally cannot
sound simultaneously.