14
Basic Parameter Editing
In this section, we’ll explain the basic parameters that make up a program.
The basic parameters are assigned to the knobs and switches on the front panel.
VCO 1, VCO 2
VCO: Voltage Controlled Oscillator
There are two oscillators in the minilogue. Os
-
cillator Parameters include the settings for the
pitch of the sound (OCTAVE, PITCH) and the
waveform (WAVE, SHAPE).
OCTAVE switch
[16’, 8’, 4’, 2’]
The pitch of oscillators 1 and 2 can be set in
octave steps.
WAVE switch
[ , , ]
This sets the waveforms for oscillators 1 and 2.
Square wave
: This waveform is used for electronic and wind instrument
sounds.
Triangle wave
: This waveform has a rounder feel than the sawtooth or square
wave.
Sawtooth wave
: This waveform is used to create sounds typical of analog syn
-
thesizers, such as synth basses and brass.
Summary of Contents for minilogue
Page 58: ......
