Korg microKORG XL+, Owner'S Manual

Page: 61 / 103

Parameter Guide
61
If you’ve selected #016+/– (CC#16+/–), #017+/–
(CC#17+/–), #019+/– (CC#19+/–), #020+/–
(CC#20+/–), or #021+/– (CC#0216+/–)
Select “#016±” Select “#016”
0
0
When a control change message is received from a
slider (value 0—127) on an external MIDI device, the
center position of the slider (control change value 64)
will produce a modulation effect of 0 on the
micro-
KORG XL+ .
If you’ve selected #016, #017, #019, #020, or #021,
setting the slider etc. to a position of 0 (control
change value 0) will produce a modulation effect of 0
on the
microKORG XL+ . Choose the type of setting that will produce the
desired result on the microKORG XL+ when you operate the sliders or
other controllers of your external MIDI device.
CC MAP (MIDI Control Change No. Map)
Here you can assign control change numbers to the most important param-
eters. When you use performance editing or program editing, using the
knob for these parameters will transmit the control change message that is
assigned here. When the assigned control change message is received,
the value of the corresponding parameter will change (
 p. 83 “2.MIDI
messages”).
(Parameter)..................................................... [PORTMNTO...VC.EF.SENS]
Selects the knob parameter (

p. 33 “KNOB”).
(Value) ..................................................................[NO.ASSIGN...CC#119]
Specifies a MIDI control change number (CC#) for the parameter selected
by “Parameter.”
NOTE
If another parameter is assigned to the number you select, an asterisk “*”
will appear at the right of the number.
NOTE
The MIDI channel for vocoder parameters will be the same MIDI channel
as for timbre 1.
USR.SCALE (User Scale)
Here you can specify a user-defined scale. You can specify a pitch adjust-
ment of –63 to +63 cents for each note in the octave (C–B).
KEY.............................................................................................. [C...B]
Select the note whose pitch you want to adjust.
(Value) ................................................................................[–63...+63]
–63 : The note will be 63 cents flatter than standard pitch.
+63 : The note will be 63 cents sharper than standard pitch.
Parameter Guide