168
X50/microX operations when control changes are
transmitted/received
The following table shows the operations that the X50/
microX will perform when control change messages are
received, and the relation between settings and controller
movements on this instrument
CC#
Control
Value
Function
0
Bank select (MSB)
0...127
bank select message MSB
1
Modulation 1
0...127
X50: Corresponds to [MOD] wheel movement in the up direction
microX: Corresponds to joystick movement in the +Y (up ) direction
2
Modulation 2
0...127
X50: Used to control Alternate Modulation (corresponds to AMS: JS–Y #02) or Effect
Dynamic Modulation (corresponds to Dmod Src: JS–Y#2)
microX: Corresponds to joystick movement in the –Y direction (down)
4
Foot controller
0...127
corresponds to when the assignable pedal function is set to Foot Pedal
5
Portamento time
0...127
portamento time
6
Data entry (MSB)
0...127
MSB of RPN and NRPN data
*1
7
Volume
0...127
volume
*2
8
Post insertion effect pan
0...127
pan after the insertion effect
10
Pan
0...127
pan
11
Expression
0...127
volume
*2
12
Effect control 1
0...127
for controlling Effect Dynamic Modulation (same as Dmod Src: FX1 #12)
13
Effect control 2
0...127
for controlling Effect Dynamic Modulation (same as Dmod Src: EX2 #13)
16
Controller (CC#16)
0...127
for controlling Modulation, Alternate Modulation (same as AMS: Ribbon #16), Effect
Dynamic Modulation (same as Dmod Src Rbn#16)
17
Knob modulation 1
0...127
corresponds to when Knob Mod.1 is assigned as the B-mode function
of a REALTIME CONTROLS knob
18
Controller (CC#18)
0...127
for controlling Alternate Modulation (same as AMS: Slider #18), Effect Dynamic Modula-
tion (same as Dmod Src: Sld #18)
19
Knob modulation 2
0...127
corresponds to when Knob Mod.2 is assigned as the B-mode function
of a REALTIME CONTROLS knob
20
Knob modulation 3
0...127
corresponds to when Knob Mod.3 is assigned as the B-mode function
of a REALTIME CONTROLS knob
21
Knob modulation 4
0...127
corresponds to when Knob Mod.4 is assigned as the B-mode function
of a REALTIME CONTROLS knob
32
Bank select (LSB)
0...127
LSB of bank select message
38
Data entry (LSB)
0...127
LSB of RPN or NRPN data
*1
64
Damper
0...127
damper effect
65
Portamento On/Off
0...63(Off), 64...127(On)
turn the portamento effect on/off
66
Sostenuto On/Off
0...63(Off), 64...127(On)
turn the sostenuto effect on/off
67
Soft
0...127
soft pedal effect
70
Sustain level
0...127
sustain levels of the filter EG and amp EG
*3
71
Filter resonance level
High pass filter cutoff frequency
0...127
resonance level of the filter
cutoff frequency of the high pass filter
*4
*3
72
Release time
0...127
release times of the filter EG and amp EG
*3
73
Attack time
0...127
attack times of the filter EG and amp EG
*3
74
Low pass filter cutoff frequency
0...127
cutoff frequency of the low pass filter
*3
75
Decay time
0...127
decay times/slope times of the filter EG and amp EG
*3
76
LFO1 speed
0...127
LFO1 speed
*3
77
LFO1 depth
0...127
pitch LFO1 intensity
*3
78
LFO1 delay
0...127
LFO1 delay
*3
79
Filter EG intensity
0...127
filter EG intensity
*3
80
Panel switch1 On/Off
0...63(Off), 64...127(On)
X50: Corresponds to On/Off when the SW1 function is set to SW1 Mod.
microX: Used to control Alternate Modulation and Effect Dynamic Modulation
81
Panel switch2 On/Off
0...63(Off), 64...127(On)
X50: Corresponds to On/Off when the SW2 function is set to SW2 Mod.
microX: Used to control Alternate Modulation and Effect Dynamic Modulation
82
Foot switch On/Off
0...63(Off), 64...127(On)
corresponds to on/off when the function of the assignable foot switch is set to Foot SW
83
Controller (CC#83)
0...127
for controlling Alternate Modulation (same as AMS: MIDI CC#8), Effect Dynamic Modulation
(same as Dmod Src: CC#83)
91
Effect depth 1 (send 2 level)
0...127
send 2 level
92
Effect depth 2 (insertion effect On/Off)
0(Off), 1...127(On)
turn insertion effect on/off
*5
93
Effect depth 3 (send 1 level)
0...127
send 1 level
94
Effect depth 4 (master effect 1 On/Off)
0(Off), 1...127(On)
master effect 1 on/off
*5
95
Effect depth 5 (master effect 2 On/Off)
0(Off), 1...127(On)
master effect 2 on/off
*5
96
Data increment
0
97
Data decrement
0
98
NRPN(LSB)
2
10
11
corresponds to the arpeggiator on/off switch
corresponds to the arpeggiator Gate control knob
corresponds to the arpeggiator Velocity control knob
*6
*6
*6
99
NRPN (MSB)
0
MSB of NRPN
100
RPN(LSB)
0
1
2
select the pitch bend range
select Fine Tune
select Coarse Tune
*1
*1
*1
101
RPN(MSB)
0
MSB of RPN
