manualshive.com logo in svg

Korg M50-73, Parameter Manual

Share
Download
Korg M50-73 Parameter Manual Download Page 92

Combination mode

84

0–5: ARPEGGIATOR A, 
0–6: ARPEGGIATOR B

Here, you can make arpeggiator settings for the 
combination. A combination can run two arpeggiators 
simultaneously. 

Arpeggiator parameters can be edited in P7: ARP/DT, but 
certain major parameters can be edited in these pages as 
well. You can edit these parameters in realtime, for example, 
by changing the arpeggio pattern while playing in Combi 
P0: Play.

You can also use the TEMPO knob and the control surface 
arpeggio control (ARP) GATE knob, VELOCITY knob, 
LENGTH knob, and OCTAVE knob to control the 
arpeggiator in realtime.

To save the edits you make, use 

Write Combination

.

0–5(6)a: Combination Select, Tempo

Bank, Combination Number & Name

These are the bank, number, and name of the current 
Combination. Here, you can also select a combination.

For more information, please see “0–1(2)a: Combination 
Select” on page 80.

 (Tempo)

[040.00...300.00, EXT]

For more information, please see “

 (Tempo)” on page 81.

0–5(6)b: Arpeggiator Run A/B, 

Timbre assign

Arpeggiator Run A, B

When the ARP ON/OFF switch is on, the arpeggiator(s) you 
checked here will run if they are assigned to a timbre by 

Arpeggiator Assign

 (7–1(2)c).

When the arpeggiator is on, these check boxes let you turn A 
and B on/off.

This parameter can also be set from P7: Arpeggiator/Drum 
Track page 

Arpeggiator Run A, B

.

Timbre assign

This indicates the arpeggiator A and B assignment status for 
each timbre 1–8. These settings are made in 

Arpeggiator 

Assign

 (7–1(2)c).

0–5(6)c: Arpeggiator A (B)

Pat (Pattern)

[P0...P4, U0000(INT)...U0899(INT),

U0900(USER)...U1027(USER)]

Octave

[1, 2, 3, 4]

Reso (Resolution)

[

 

 ,  

 ,  

 

 ,  

 ,  

 

 ,  

 ]

Sort

[Off, On]

Latch

[Off, On]

Key Sync.

[Off, On]

Keyboard

[Off, On]

Set the various parameters of the combination arpeggiator. 
For more information, please see “COMBI P7: Arpeggiator/
Drum Track” on page 107.

These parameters can also be set from 7–3(4): Arpeggiator 
A(B) Setup.

▼

0–5(6): Menu Command

• 0: 

Write Combination

☞

p.120

• 1: 

Exclusive Solo

☞

p.73

• 2: 

Copy from Program

☞

p.120

• 3: 

Copy Arpeggiator

☞

p.122

For more information, please see “Combination: Menu 
Command” on page 120.

0–5a

0–5b

0–5c

0–5
Menu

Summary of Contents for M50-73




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands