manualshive.com logo in svg

Korg M50-73, Parameter Manual

Share
Download
Korg M50-73 Parameter Manual Download Page 292

Effect Guide

284

Controlling the Master Effects 
via MIDI

In the same way as for insert effects, parameters of the 
master effects can also be controlled in realtime via Dynamic 
Modulation (Dmod) from the M50’s controllers or an 
external MIDI device during performance or from the 
sequencer.

Program mode

Effect parameters are controlled on the global 

MIDI channel

 

(Global 1–1a).

Combination and Sequencer modes

In Combination and Sequencer modes, the control channel 
for MFX1 and MFX2 are specified by the 

Ch

 (Control 

Channel) setting in the MFX1 and 2 pages. You can choose 
Ch01–16 or Gch.

Ch01–16: 

Select this option if you wish to control the 

parameters for each Master Effect on different channels.

Gch:

 Select this option if you wish to control the parameters 

on the global 

MIDI channel

 (Global 1–1a). This is the 

normal setting.

Note: 

Since Sequencer mode lets you record and play 

exclusive messages and edit tracks that include System 
Exclusive events, you can use them to switch effects or 
modify effect parameter values during song playback.

Summary of Contents for M50-73




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands