manualshive.com logo in svg

Korg M50-73, Parameter Manual

Share
Download
Korg M50-73 Parameter Manual Download Page 234

Global mode

226

External setups

The content that you edit in Global mode is preserved 
until you turn off the power, but will be lost when the 
power is turned off. To save your settings, execute 

Write Global Setting

 (or 

Update Global setting

).

1. Press the MODE GLOBAL switch to enter Global 

mode.

2. Access the Global P1: MIDI– External Mode 1 page.

3. Use “Setup (Setup Select)” to select the external setup 

that you want to edit.

4. In the External Mode 1 page you can make settings for 

knobs 1–8.

MIDI Channel

 specifies the MIDI channel on which each 

knob will transmit.

CC#

 specifies the MIDI control change that each knob will 

transmit.

5. Access the Global P1: MIDI– External Mode 2 page. 

Here, you can make settings for chord trigger switches 
1–4.

MIDI Channel

 specifies the MIDI channel on which each 

switch will transmit.

Note/CC#

 specifies the note or MIDI control change that 

each switch will transmit.

Fixed Velocity

 specifies the velocity of the notes that will be 

transmitted.

Assigning a name

It’s a good idea to name any external setups that you create 
so that you can remember its purpose.

Use the 

Rename External Setup

 utility to assign a name. For 

more details, please see “Editing names” on page 91 of the 
Owner’s manual.

1–4: External Mode 2

When control surface EXTERNAL is selected, the chord 
trigger switches will transmit the note on/off messages or 
control change messages on the specified channel. For more 
information, please see “0–8d: External” on page 14.

1–4a: External Setup

Setup (External Setup)

[000…127]

This selects the External Setup to edit.

You can assign a name to each setup. For more information, 
please see “Rename External Setup” on page 254.

1–4b: Chord Trigger Switches

MIDI Channel

[Ch01…16, Gch]

This sets the MIDI Channel for the chord trigger switch. 
Each switch can send on a different channel, if desired.

Gch

 means that the pad will transmit on the Global MIDI 

Channel, as set in Global mode. This allows you to re-direct 
any number of knobs and chord trigger switches to a 
different channel at once, without editing the individual 
controls.

Note/CC#

[Off, C–1…G9, CC#000…119]

Each chord trigger switch can send either a MIDI note or a 
MIDI CC message. When assigned to a CC, the switch sends 
a value of 127 when it is pressed down, and a value of 0 
when it is released.

Fixed Velocity

[001…127]

This specifies the velocity for each chord trigger switch. The 
velocity is fixed at the value you specify here.

When you press the switch, the note will be transmitted 
with this velocity value on the MIDI channel specified by 

MIDI Channel

.

1–4b

1–4a

1–4
Menu

Summary of Contents for M50-73




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands