manualshive.com logo in svg

Korg M50-73, Parameter Manual

The Korg M50-73 is a versatile and powerful synthesizer with 73 keys. Unlock the full potential of this incredible instrument by downloading the free Parameter Manual from our website. This comprehensive manual provides essential guidance on programming and exploring the M50-73's vast array of features and functions.

Share
Download
background image

Global P1: MIDI 1–2: MIDI Routing

223

1–2: MIDI Routing

Here, you can make MIDI Routing and MIDI Filter settings 
for the entire M50.

Note: 

To transmit MIDI exclusive dump data, you’ll use the 

menu commands of the P1: MIDI page.

1–2a: MIDI Routing

Chord Trigger SW MIDI Out

[Chord Trigger SW CC/Note, Chord Notes]

This setting specifies the MIDI messages that are output 
when you press a chord trigger switch.

Chord Trigger SW CC/Note: 

When you press a switch, the 

MIDI note number or MIDI control change message 
specified by the chord trigger switches 

SW1

–

SW4

 (Global 2–

2c) setting will be transmitted.
If the setting is off, no MIDI message will be transmitted.

Chord Notes:

 When you press a switch, the (up to eight) 

MIDI note-on/off messages (and velocities) specified by the 
chord trigger switches 

SW1

–

SW4

 (Global 1–4b) setting of 

each program, combination, or song will be transmitted. If 
all notes are turned off, no MIDI messages will be 
transmitted.

ARP Controllers MIDI Out

[Control Change, SysEx-Param Change]

This specifies the MIDI messages that will be transmitted 
when you operate the ARP ON/OFF switch or when you 
operate knobs 1–4 with control surface ARP selected.

Control Change:

 Operating the ARP ON/OFF switch or 

knobs 1–4 will transmit the MIDI control change messages 
that are assigned in Global P2–2: Controllers “SW – ARP 
ON/OFF” and “KNOB1 – ARP GATE” – “KNOB4 – ARP 
OCTAVE.”

SysEx-Param Change: 

Operating the ARP ON/OFF switch 

or knobs 1–4 will transmit MIDI System Exclusive 
parameter change messages for the parameters (arpeggiator 
on/off, 

Gate

, 

Velocity

, 

Length

, 

Octave

) assigned to the 

switch and knobs.

1–2b: MIDI Filter

Enable Program Change

[Off, On]

On (checked):

 Program changes will be transmitted and 

received.

In Program mode (P0: Play), the program will be switched 
when a program change message is received on the global 
MIDI channel specified by 

MIDI Channel

 (Global 1–1a). 

When you switch programs, a program change message will 
be transmitted on the global MIDI channel.

In Combination mode (P0: Play), the combination will be 
switched when a program change message is received on 
the global MIDI channel. However, it is possible to set the 

Enable Combination Change

 parameter so that the 

combination is not switched. When a program change is 
received on the channel specified for each timbre by 

MIDI 

Channel

 (Combi 3–1(2)c), the program of that timbre will be 

switched. However, the program changes for each timbre 
will be affected by the setting of the 

Enable Program 

Change

 parameter (Combi 5–1–1(2)c).

When you switch combinations, a program change message 
will be transmitted on the global MIDI channel, and also 
transmitted simultaneously on the channel of timbres whose 

Status

 (Combi 3–1(2)c) is set to EXT or EX2.

In Sequencer mode, incoming program change messages on 
a channel that corresponds to a track whose 

Status

 (Seq 3–

1(2)c) is set to INT or BTH will switch programs on that 
track.

When you select a song or play back sequencer data, 
program changes will be transmitted on the channels of 
tracks whose 

Status

 is set to BTH, EXT, or EX2.

Off (unchecked):

 Program changes will not be transmitted 

or received.

Bank Change

[Off, On]

On (checked):

 The Bank Select control change message will 

be transmitted together with program change messages. 
This is valid when 

Enable Program Change

 is checked.

Off (unchecked):

 Bank Select messages will not be 

transmitted or received.

When recording on the internal sequencer, bank select 
messages will be recorded regardless of this setting. 
However for playback, this setting will apply.

Combination Change

[Off, On]

On (checked):

 When in Combi P0: Play, an incoming 

program change message on the global MIDI channel set by 

MIDI Channel

 (Global 1–1a) will switch combinations.

This is valid when 

Enable Program Change

 is checked.

An incoming program change on a channel other than the 
global MIDI channel will switch the program of any timbre 
that matches that MIDI channel.

Off (unchecked):

 An incoming program change message on 

the global MIDI channel will switch the program of any 
timbre whose 

MIDI Channel

 (Combi 3–1(2)c) matches the 

global MIDI channel. The combination will not be switched.

The program changes for each timbre will be affected by the 
setting of the 

Enable Program Change

 parameter (Combi 5–

1–1(2)c).

1–2a

1–2b

1–2
Menu

Summary of Contents for M50-73




































































































































































































































































































































































































































Reviews:

No comments

Related manuals for M50-73

Alpine KCE-G7QI Installation preview
KCE-G7QI
Brand: Alpine Pages: 2
Logic Controls KB5000 Series Features preview
KB5000 Series
Brand: Logic Controls Pages: 1
Riotoro GHOSTWRITER Classic Installation Manual preview
GHOSTWRITER Classic
Brand: Riotoro Pages: 40
Metra Electronics 99-5825S Installation Instructions Manual preview
99-5825S
Brand: Metra Electronics Pages: 8
Philips CID2680 User Manual preview
CID2680
Brand: Philips Pages: 41
Optimus 42-4032 Owner'S Manual preview
42-4032
Brand: Optimus Pages: 32
Vaporesso TARGET PM30 User Manual preview
TARGET PM30
Brand: Vaporesso Pages: 7
Acrox Technologies KB15 User Manual preview
KB15
Brand: Acrox Technologies Pages: 8
Adesso PCK-308T User Manual preview
PCK-308T
Brand: Adesso Pages: 2
Adesso AKB-410UB Quick Start Manual preview
AKB-410UB
Brand: Adesso Pages: 1
Adesso AKB-110 Series Quick Start Manual preview
AKB-110 Series
Brand: Adesso Pages: 1
Gigabyte Force K7 Quick Start Manual preview
Force K7
Brand: Gigabyte Pages: 45
Minebea Cool Leaf Use Manual preview
Cool Leaf
Brand: Minebea Pages: 75
CSL 300940 User Manual preview
300940
Brand: CSL Pages: 8
Prestel KB-IP3 User Instruction preview
KB-IP3
Brand: Prestel Pages: 13
ADE AM 1400 adeVital Activity Operating Instructions Manual preview
AM 1400 adeVital Activity
Brand: ADE Pages: 16
Cherry G86-6x4xx Operating Manual preview
G86-6x4xx
Brand: Cherry Pages: 8
Krown NXKROMKROWN Quickmanual Installation preview
NXKROMKROWN
Brand: Krown Pages: 6

Brands by name

Popular brands

Load more brands