manualshive.com logo in svg

Korg M50-73, Parameter Manual

Share
Download
Korg M50-73 Parameter Manual Download Page 221

System Exclusive events supported in Sequencer mode M50 sequencer file formats

213

M50 sequencer file formats

The M50 sequencer supports both the proprietary M50 Song 
format, and Standard MIDI Files. 

If you like, you can convert data between the two formats, 
simply by loading the data in one format and then saving it 
in the other.

For details, please see “Save to Standard MIDI File” on 
page 268, and “Save SEQ” on page 268.

M50 Song format

This is the native M50 sequencer format, which is required 
to ensure that all M50-specific data is saved correctly.

Standard MIDI Files

You can also load and save Standard MIDI Files (SMF), for 
compatibility with other sequencers. Note that some M50-
specific data may not be maintained when in SMF files.

GM, XG, and GS System Exclusive Data

The M50 sequencer can record System Exclusive messages, 
including XG or GS data. For details, please see “System 
Exclusive events supported in Sequencer mode” on 
page 211.

Note that GM, XG, and GS exclusive messages do not 
affect the M50 when they are played back.

Summary of Contents for M50-73




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands