manualshive.com logo in svg

Korg M50-73, Parameter Manual

Share
Download
Korg M50-73 Parameter Manual Download Page 11

PROG P0: Play 0–1: Main

3

Category

[00...17/00...07]

Here, you can select programs by category.

Category/Program Select menu:

Here, you can select programs by main category and sub-
category. All programs are classified into eighteen main 
categories, and each category is classified into eight sub-
categories. You can use these main categories and sub-
categories to find and select programs.

1. Press the Category popup button (above the Program 

Select parameter) to open the Category/Program Select 
menu.

2. Press one of the tabs on the left or right to select the 

desired category.

Note: 

Only Categories and Sub-categories that are assigned 

to programs can be selected from the tabs.

3. Select a program from the list. 

You can touch a Program’s name directly, or use the Inc 

q

 

and Dec 

u

 switches.

Use the scroll bar to browse through all Programs in the 
Category. 

Category/Program Select menu

4. To select from a sub-category, press the Jump to Sub 

button .

Press one of the left tabs to select a sub-category.

Note: 

Only Sub-categories that are assigned to Programs can 

be selected from the tabs.

5. Press the OK button to confirm your choice, or press the 

Cancel button to exit without changing the Program.

Note: 

You can assign a category to a Program in the 

Write 

Program

 dialog.

 (Tempo)

[40.00... 300.00, EXT]

This is the tempo for the current Program, which applies to 
the arpeggiator, tempo-synced LFOs, and tempo-synced 
effects.

040.00...300.00

 allows you to set a specific tempo in BPM, 

with 1/100 BPM accuracy. In addition to using the standard 
data entry controls, you can use the TEMPO knob to adjust 

the bpm, or just play a few quarter-notes on the TAP 
TEMPO button.

EXT is displayed if the 

MIDI Clock

 (Global 1–1a) is set to 

External MIDI

 or 

External USB

. This is also shown if the 

MIDI Clock

 setting is Auto and MIDI clock data is being 

received from an external device. If the tempo source is EXT, 
the arpeggiator etc. will synchronize to MIDI clock data 
from an external MIDI device.

0–1b: Program Information

The following information for the selected program is 
displayed:

SW1, SW2

These are the functions controlled by the SW1, SW2 
switches.

C.S. (Control Surface)

This indicates the currently selected control assignment. The 
control surface is available and active from any page.

FILTER 1, 2

This indicates the filter type setting for filter 1 and 2.

AMP EG 1, 2

This indicates the EG settings for amp 1 and 2.

EQ (Low, Mid[Hz], Mid, High)

This indicates the 3-band EQ settings. You can edit the 
values.

Low: 

Adjusts the gain of the 80 Hz low-shelving EQ in 0.5 

dB steps.

Mid [Hz]: 

Adjusts the center frequency of the mid-

sweepable EQ.

Mid:

 Adjusts the gain of the mid-sweepable EQ in 0.5 dB 

steps.

High:

 Adjusts the gain of the 10 kHz high shelving EQ in 0.5 

dB steps.

Sub-category

tab

Scroll bar

Sub-category

tab

Scroll bar

Summary of Contents for M50-73




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands