manualshive.com logo in svg

Korg M3, Parameter Manual

Share
Download
Korg M3 Parameter Manual Download Page 92

Program mode

82

7–1–6: Random Seeds

Here you can make randomization settings for the KARMA 
function.

This lets you capture the endlessly varying phrases 
generated by randomization.

7–1–6a: Start/Loop

This lets you freeze (capture and reproduce) any desired 
phrase of the infinite variations generated by Randomize, 
which is one of the KARMA function’s main features.

By using the menu command Capture Random Seed with 
the Start Seed and Freeze Loop Length parameters, you can 
loop a randomly changing phrase, or play the same phrase 
each time you trigger it. This functionality is collectively 
referred to as Freeze Randomize.

Not all GEs have been programmed to utilize the 
KARMA function’s randomize capabilities. If 
randomize is not used, these Freeze Randomize 
parameters will have no effect.

A:

Start Seed

[–2147483648...0: Random...+2147483647]

Specifies the seed that is used by the KARMA module to 
generate the random phrase.

Note: “Seed” is the internal data from which the 
randomization is created. Start Seed is used when a trigger 
occurs.

0: Random:

 A different phrase will be generated each time 

the trigger occurs. Within the KARMA module, a different 
Start Seed

 value is specified randomly each time the trigger 

occurs.

Any value other than Random:

 The same phrase will be 

generated each time the trigger occurs. In contrast to 0: 
Random, fixing the Start Seed value will cause the same 
phrase to be generated each time the trigger occurs. 
Different values for the Start Seed parameter will produce 
different phrases, but the same phrase will always be 
generated if the Start Seed value is the same.

How the Start Seed setting affects the phrase

Let’s hear how different Start Seed settings will change the 
phrase.

1. In Program mode, select INT-C103: Vintage SciFi Lead. 

This program plays a phrase using a lead synth sound.

2. Turn the front panel KARMA ON/OFF switch on.

3. In the Prog P7–1: KARMA1– GE Setup page, set “GE 

Select” to 270: Improv Lead 1.

4. In the Prog P7–1: KARMA1– Trigger page, set “Note 

(Trigger/Latch)” Trigger to Any.

5. Turn the front panel KARMA LATCH switch on.

6. Go to the Prog P7–1: KARMA1– Random Seeds page, 

and set the KARMA module’s “Start Seed” to 0: Ran-
dom.

The KARMA module will generate a lead synth phrase.

7. Use pad 1 to produce a trigger several times at a fixed 

interval (one or two seconds). When doing so, pay 
attention to the phrase that begins immediately after 
triggering. A different phrase will begin playing each 
time triggering occurs.

8. Set Start Seed to any value other than 0: Random. For 

this example, we’ll set it to +1.

9. As you did in step 7, trigger pad 1 several times, and 

pay attention to the phrase that begins immediately 
after triggering. The same phrase will begin playing 
each time triggering occurs.

10. Set Start Seed to a value other than +1, and repeat the 

actions you performed in step 7.

The phrase will be different than when Start Seed was +1, 
but the same phrase will begin playing each time triggering 
occurs.

7–1

–6a

7–1

–6

Menu

Summary of Contents for M3








































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands