manualshive.com logo in svg

Korg M3, Parameter Manual

Share
Download
Korg M3 Parameter Manual Download Page 641

Media mode information About KORG format files

631

KSF (KORG Sample File) files

There are four types of structure for these files. One consists 
of a Sample Parameter chunk1, Sample Parameter chunk2, 
Sample Data chunk, Sample Number chunk and Sample 
name (SMP1 + SMP2 + SMD1 + SNO1 + NAME). Another 
consists of a Sample Parameter chunk1, Sample Parameter 
chunk2, Sample Data chunk, Sample Filename chunk, Sample 
Number chunk, and Sample name chunk (SMP1 + SMP2 + 
SMD1 + SMF1 + SNO1 + NAME). The latter structure is in the 
case where the sample data of the Sample chunk is empty, 
and uses the sample data of the .KSF file specified by the 
Sample Filename chunk (shared sample data).

When saving to a floppy disk and a single media cannot 
accommodate all of the data, it is possible to automatically 
divide the file and continue the save operation.

When a .KSF file is created in this way, the first file will 
consist of the Sample Parameter chunk1, Sample Parameter 
chunk2, Sample Number chunk, and Sample name a 
divided Sample Parameter chunk, and a divided Sample 
Data chunk (SMP1 + SMP2 + SNO1 + NAME + SPD1 + 
SDD1), and the second and subsequent files will consist of a 
divided Sample Data chunk (SDD1).

• Sample parameter chunk1

Note: Sample parameter chunk 1 is used by the TRINITY 
series, TRITON series, and TR.

• Sample parameter chunk2

Note: Sample parameter chunk 2 is used by the OASYS, 
TRITON series, and M3.

• Sample data chunk

• Attributes

• Sample number chunk

• Sample name chunk

• Sample filename chunk

If the .KSF filename is “SKIPPEDSAMPL”, it will be 
treated as a sample skipped during loading.

If the .KSF filename is “INTERNALnnnn”, internal sam-
ples will be used.

• Divided sample parameter chunk

• Divided sample data chunk

Chunk ID (‘SMP1’)

[4 bytes]

Chunk size (32)

[4 bytes]

Sample name

[16 bytes]

Start address

[4 bytes]

2nd start address

[4 bytes]

Loop start address

[4 bytes]

Loop end address

[4 bytes]

Chunk ID (‘SMP1’)

[4 bytes]

Chunk size (32)

[4 bytes]

Sample name

[16 bytes]

Start address

[4 bytes]

2nd start address

[4 bytes]

Loop start address

[4 bytes]

Loop end address

[4 bytes]

Chunk ID (‘SMD1’)

[4 bytes]

Chunk size (12 + number of sample 
databytes)

[4 bytes]

Sampling frequency

[4 bytes]

Sample rates of sample files supported by the M3:
48000/47619/44100/32000/31746/31250/29400/24000/
23810/22254/22050/21333/21164/20833/19600/16000/
15873/15625/14836/14700/14222/14109/13889/13067/
12000/11905/11127/11025/10667/10582/10417/9891/
9800/9481/9406/9259/8711/8000/7937/7813/7418/
7350/7111/7055/6945/6534/6000/5953/5564/5513/
5333/5291/5208/4945/4900/4741/4703/4630/4356/
4000/3968/3906/3709/3675/3556/3527/3472/3267/
3000/2976/2782/2756/2667/2646/2604/2473/2450/
2370/2352/2315/2178/2000/1984/1855/1838(Hz)
Attributes

[1 byte]

Loop tune (–99…+99 cents)

[1 byte]

Number of channels (1)

[1 byte]

Sample size (8/16)

[1 byte]

Number of samples

[4 bytes]

Sample data

variable length

Chunk ID (‘SNO1’)

[4 bytes]

Chunk size (4)

[4 bytes]

Sample number (0–)

[4 bytes]

Chunk ID (‘NAME’)

[4 bytes]

Chunk size (fixed at 24)

[4 bytes]

Sample name

[24 bytes]

Chunk ID (‘SMF1’)

[4 bytes]

Chunk size (12)

[4 bytes]

KSF filename

[12 bytes]

Chunk ID (‘SPD1’)

[4 bytes]

Chunk size (12)

[4 bytes]

The following up to the sample size is the same as in the 
SMD1 chunk
Sampling frequency

[4 bytes]

Attributes

[1 byte]

Loop tune

[1 byte]

Number of channels

[1 byte]

Sample size

[1 byte]

Number of samples

[4 bytes]

Total number of samples in all divided files

Chunk ID (‘SDD1’)

[4 bytes]

1: +12 dB playback

0: 0 dB playback*

* For uncompressed data, this bit is handled as a 

switch that specifies the playback gain.
For compressed data, this bit is handled as a 
compression ID.

Sample parameter attributes

MSB

LSB

1: Not Use 2nd Start 0: Use It
1: Reverse 0: Forward
1: Loop Off 0: Loop On

Compression ID
1: Compressed data 0: Un-compressed data

Summary of Contents for M3








































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands