manualshive.com logo in svg

Korg M3, Parameter Manual

Share
Download
Korg M3 Parameter Manual Download Page 557

Index Group Random Weighting Parameters

547

Random Walk Max Step

[1…9]

Sets the largest step that can be taken when Index Pattern 
Type is set to 2: Random Walk, as described above. The 
value relates to movement of the Index through the Note 
Series, not a particular musical interval.

Not available unless Index “Pattern Type” is 2: Random 
Walk

.

Random Weighting Parameters

The Random Weighting Parameters are made available 
when at least one step in the Index Pattern has multiple 
values selected (constituting a “random pool” of values).

☞

p.541 “Rhythm Group”: “Random Weighting Parameters - 

Pools”.

Pools-Random Factor

[–99…+99]

☞

p.541 “Rhythm Group”: “Pools-Random Factor”.

Pools-Weighting Curve

[0…3]

For more information, please see “Rhythm Group” on 
page 539, “Pools-Weighting Curve” on page 541, and 
“Random Weighting Curves” on page 584.

The following table summarizes the effect of the various 
Weighting Curves and the Factor field on the choices from 
the Index Pattern Pools:

Associated Parameters

Cluster Mode

[0, 1]

Sets the way that clusters affect the advancement through 
the Index Pattern. When set to Multi, a cluster will advance 
by as many steps as notes in the cluster, depending on other 
internal settings.

0: Single-1 Step per Cluster

Each time a note, cluster of notes, or group of drum notes is 
generated one Index Pattern Value will be chosen for the 
resulting note or cluster of notes, after which the Index 
Pattern advances to the next value. For example, a cluster of 
six notes will all be generated from the next six adjacent 
notes in the Note Series (or Drum Pattern) and advance the 
pattern by one to the next step. In other words, when a 
cluster is about to be generated, the index in the Note Series 
will first move an amount determined by the previous 
Step’s Index Pattern Value; then all the notes in the cluster 
will be generated from adjacent indexes, after which the 
Pattern will again advance by one. This is useful for creating 
clusters of notes which jump around following the Index 
Pattern exactly; the bottom note of each cluster essentially 
follows the path that would be taken by a cluster size of 1, 
with the effect that cluster size has no effect on how quickly 
the Index Pattern moves through the Note Series and Phase 
(or Drum Pattern). Also useful for randomizing Drum 

Patterns, since it will cause the index into the Drum Pattern 
to jump around and not move forward in a linear fashion.

Index Pattern= 2, Cluster Size = 6 

1: Multi-1 Step For Each Note In Cluster

When the internal GE parameter “Advance Mode” is 0: In-
dependent: 

For every note in a cluster or group of drum notes generated 
simultaneously, a separate Index Pattern Value will be 
chosen after which the Index Pattern advances to the next 
value. For example, a cluster of six notes will be generated 
with the next six Index Pattern Values (with a net advance of 
six steps). This means that each note in the cluster will not 
necessarily be the adjacent note in the Note Series (or Drum 
Pattern), but a certain distance from the previous note as 
specified by the pattern value. This is useful for creating 
clusters of notes with different voicings, or randomizing 
Drum Patterns in a manner different than above. Another 
effect of this is that after each cluster, the next cluster starts 
where the previous cluster left off, in effect advancing 
through the Phase and the Note Series (or Drum Pattern) 
much more quickly.

Index Pattern= 2, Cluster Size= 6

When the internal GE parameter “Advance Mode” is 1: 
Lock (R) or one of the Drum Lock options:

The Index Pattern is using the other pattern’s index; 
therefore, it is not possible for it to advance with each note. 
So it works slightly differently: the Index Value at the 
current step is used for each note in the cluster. So a cluster 
of six notes will be generated with the same distance 
between each index, as specified by the current Index 
Pattern Value. This value also indicates where the next 
cluster will start. For example, with an Index Pattern value 
of {3}, a cluster of 3 notes will have the indexes spaced by 3 
and the next cluster will start 3 indexes away from the last 
generated note.

Index Pattern = {3 2 1}, Cluster Size = 3

Advance Mode: 1: Lock (R), Cluster Mode: 1: Multi

When the “GE Type” (

☞

p.529) is 0: Generated-Riff, 

setting this to 1: Multi will have no effect unless there is 
a Cluster Pattern containing values of more than just 1.

When the “GE Type” is 2: Generated-Drum, setting this 
to 1: Multi will have no effect unless at least one Drum 
Pattern has the “[c] (clusters)” button turned on in the 
Phase Pattern and there is a Cluster Pattern containing 
values of more than just 1.

0: Exponential

2: Exp-S

1: Logarithmic

3: Log-S

Index Pool values that receive priority:

Weighting 
Curve

Factor

+ (positive)

– (negative)

Exp/Log

higher in grid

lower in grid

Exp-S/Log-S

middle

higher/lower

0: Single

1: Multi

Note 
Series:

C2 E2 G2 B2 C3 E3 G3 B3 C4 E4 G4 B4

Step1:

C2 E2 G2 B2 C3 E3

Step2:

G2 B2 C3 E3 G3 B3

Step3:

C3 E3 G3 B3 C4 E4

Step4:

G3 B3 C4 E4 G4 B4

Note 
Series:

C2 E2G2B2 C3 E3G3B3 C4 E4G4B4 C5 E5G5B5 C6 E6G6B6 …

Step1:

C2

G2

C3

G3

C4

G4

Step2:

C5

G5

C6

G6 …

Note 
Series:

C2 E2G2B2 C3 E3G3B3 C4 E4G4B4 C5 E5G5B5 C6 E6G6B6 …

Step1:

C2

B2

G3

Step2:

E2

B4

E5

Step3:

B5 C6 E6 …

Summary of Contents for M3








































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands