Korg Electronic Keyboard Parameter Manual Download | Manualshive

Page: 418 / 1127

background image

Combination mode

408

The window will cover the parameters for some of the
Timbres on either the right or left sides of the display. If
you select one of these Timbres, the window will
automatically move to the other side of the display.

Copy Vector Envelope

Copy Vector Envelope

is available on the Vector

Envelope tab of the EQ/Vector/Controller page.

This command copies the vector envelope from a
specified program, combination/timbre, or song. For
more information, see “Copy Vector Envelope” on
page 144.

Copy Pad Setup

Copy Pad Setup

is available on the Pads tab of the

EQ/Vector/Controller page.

This command copies the Pad from a specified
program, combination/timbre, or song. (“Use the
“From” field to select the mode, bank, and number of
the desired copy-source. You can press a BANK key to
select the desired bank.” on page 144)

Detune BPM Adjust

Detune BPM Adjust

is available on the Pitch tab of the

Timbre Parameters page.

This command changes a loop’s tempo by changing
the Timbre’s

Detune

parameter. The sample data itself

is not altered. Since this alters the pitch of the loop
along with the tempo, it’s generally suited only to un-
pitched percussive loops.

Note

: Using

Detune BPM Adjust

will over-write any

previous

Detune

settings.

1. Go to the Pitch tab of the Timbre Parameters page.
2. Select the Detune parameter for the desired

Timbre.

Detune BPM Adjust

is available only when the

Detune

parameter has been selected. Otherwise, the

menu selection will be grayed out.

3. Select “Detune BPM Adjust” to open the dialog

box.

4. In From, specify the loop’s original BPM value.

Ignore any previous changes from using Detune BPM
adjust.

5. In To, specify the desired BPM value.

The appropriate

Detune

value will be calculated

automatically from these two values.

For example, if you set “From” to 60 bpm and “To” to
120 bpm,

Detune

will be set to +1200 (one octave up).

6. To execute the Detune BPM Adjust command,

press the OK button. To exit without changing the
Detune value, press the Cancel button.

Note: since this command does not affect the sample
data itself, and always over-writes the previous

Detune

amount, using it repeatedly has no cumulative

effect.

Copy KARMA Module

This command copies the settings of the KARMA
Module used by a specified program, combination, or
song.

1. Select “Copy KARMA Module” to open the dialog

box.

2. In “From,” select the copy source mode, bank, and

number.

You can press a BANK SELECT A–G switch to select
the bank.

3. If you selected a combination or song as the copy-

source, select the module from which you want to
copy.

4. As appropriate for the content that you want to

copy, turn “GE RTP Control Setting & Scenes” On
(checked). (

☞

“Settings copied by Copy KARMA

Module”)

5. If you want to copy performance realtime

parameters, Dynamic MIDI, and front panel
settings, turn “Perf. RTP & Panel Settings” On
(checked). (

☞

“Settings copied by Copy KARMA

Module”)

6. If you also want to copy the note and velocity

settings of pads 1–8, turn “Pads” On (checked).

7. Use the “To”

fi

eld to select the copy-destination

KARMA module.

8. Press the OK button to execute the Copy KARMA

Module command, or press the Cancel button if
you decide to cancel.

Settings copied by “Copy KARMA Module”

When copying from a program

If “GE RTP Control Setting & Scenes” and “Perf. RTP &
Panel Settings” are Off (checked), the following
content is copied.

• The GE selected by the copy-source KARMA

module.

• Settings of the KARMA module parameters (7–3:

Module Parameter-Trigger, 7–4: Module
Parameter-Control).

• 7–5: GE RTP page “MIN,” “MAX,” and “VALUE”

settings.

If you turn “GE RTP Control Setting & Scenes”
On (checked)

«
...
416
417
418
419
420
...
»

Summary of Contents for Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Electronic Keyboard

Brand: Radio Shack Pages: 12

Brand: A-Champs Pages: 19

Brand: Cobra Pages: 2

Brand: TYPHOON Pages: 2

Brand: Sejin Electron Pages: 9

Brand: Toshiba Pages: 186

Brand: Toshiba Pages: 198

Midi Master Pro

Brand: TerraTec Pages: 32

Brand: lifetrack Pages: 9

Brand: Targus Pages: 15

Brand: J.Burrows Pages: 9

Brand: Strongman Tools Pages: 44

Brand: perixx Pages: 21

7880IPG-NAT Series

Brand: evertz Pages: 46

Brand: Ranger Pages: 20

SMART TEMP PSP711RF Series

Brand: Lux Products Pages: 5

Brand: Akai Pages: 10

Brand: Solos Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands