manualshive.com logo in svg

Korg Electronic Keyboard, Parameter Manual

The Korg Electronic Keyboard offers a versatile musical experience and endless creative possibilities. Unlock its full potential with the Parameter Manual, a comprehensive guide that gives you control over every aspect of your music. Easily download this essential manual for free from our website, manualshive.com.

Share
Download
background image

Appendices

1002

Outgoing MIDI data will be handled with settings 
equivalent to 

Key Transpose

 0, 

Velocity Curve

 4, 

and 

After Touch Curve

 3.

Connecting an external MIDI sequencer or 
computer

You can play the OASYS’s keyboard and record your 
performance on an external MIDI 
sequencer/computer (connected via a MIDI interface), 
and then play back the recorded performance to sound 
the OASYS’s tone generator (i.e., using the OASYS as 
an input keyboard and MIDI tone generator). To do 
this, connect the MIDI OUT and MIDI IN connectors of 
the OASYS and your external MIDI sequencer/ 
computer to each other.

Local Control On settings

When connections are made as shown above, turn on 
the Echo Back function of the external MIDI sequencer 
or computer (so that data received at MIDI IN will be 
re-transmitted from MIDI OUT), and turn off the 
OASYS’s Local Control setting (so that the OASYS’s 
keyboard and tone generator will be internally 
disconnected).

When you play the keyboard of the OASYS, the 
musical data will be transmitted to the external MIDI 
sequencer or computer, and then echoed back to play 
the OASYS’s tone generator. In other words, by 
turning Local Control OFF, you can prevent notes from 
being sounded in duplicate, as would otherwise occur 
if a note were sounded by the OASYS’s own keyboard 
and again by the data that was echoed-back.

To turn off Local Control, press the “Local Control On” 
(Global P1: 1–1a) check box to uncheck it.

When using the OASYS by itself, leave Local Control 
turned on. (If this is off when the OASYS is used by 
itself, playing the keyboard will not produce sound.)

When using the KARMA function, the Global 

KARMA External MIDI Routing

 settings and the 

local control on/off setting will determine how the 
function is controlled, as follows. For more 
information, see “KARMA External Routing” on 
page 654.

Here are the settings to use if you want an external 
MIDI sequencer or computer to record only the notes 
that trigger the KARMA function, and control the 
KARMA function using the notes that are echoed-back 
during recording or playback.

When the KARMA function is turned on, playing the 
OASYS’ keyboard will not trigger the KARMA 
function; the notes you play on the keyboard will only 
be transmitted. The KARMA function will operate 
only on the notes that are echoed-back and received at 
MIDI IN. This prevents the KARMA function from 
being applied in duplicate, and ensures that it will 
operate correctly.

Note: You can also make these settings by using the 
page menu command “Setup KARMA External MIDI 
Routing”= Send the output of KARMA to external 
device/sequencer. For more information, see “Set Up 
KARMA External MIDI Routing” on page 686.

Here are the settings to use if you want the note data 
generated by the KARMA function to be transmitted 
via MIDI and recorded on your external sequencer or 
computer.

Note:

 You can also make these settings by using the 

page menu command “Setup KARMA External MIDI 
Routing”= Trigger KARMA generation from external 
device/sequencer.

Messages transmitted and received by the OASYS

In the text below, […] indicates hexadecimal notation.

MIDI channels

MIDI messages can be exchanged when the 
transmitting and receiving devices are set to the same 
MIDI channel. MIDI uses sixteen channels, numbered 
1–16. The way in which channels are handled will 
differ depending on the mode.

Program mode and Sampling mode

• Transmission/reception is performed on the global 

MIDI channel.

The global MIDI channel is the basic channel that 
the OASYS uses for MIDI transmission/reception, 
and is set by 

MIDI Channel

 (Global 1–1a).

Combination mode

• The global MIDI channel is used to transmit/ 

receive messages for selecting a combination and 
turning effects on/off, and to transmit/receive 
exclusive data.

• Each timbre will transmit/receive MIDI data on the 

MIDI Channel

 (Combination 2–1a) that is specified 

for that timbre.

• The 

Ch

 MIDI channel specified for each effect 

(Combination 8–7a, 9–2a, 9–3, 9–4, 9–5) is used to 
control dynamic modulation of the insert/master/ 

computer

MIDI IN

OASYS

MIDI interface

MIDI IN

MIDI OUT

MIDI OUT

Summary of Contents for Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Electronic Keyboard

M-Edge BACKLIT Instruction Manual preview
BACKLIT
Brand: M-Edge Pages: 5
LifeFitness DISCOVER CONSOLE Operation Manual preview
DISCOVER CONSOLE
Brand: LifeFitness Pages: 79
Targus ECOSMART AKB873 User Manual preview
ECOSMART AKB873
Brand: Targus Pages: 9
Krüger & Matz KM0396 Owner'S Manual preview
KM0396
Brand: Krüger & Matz Pages: 24
Kenwood SJM550 series Instructions Manual preview
SJM550 series
Brand: Kenwood Pages: 90
Kenwood SJM240 series Manual preview
SJM240 series
Brand: Kenwood Pages: 55
KeySonic ACK-109 BL User Manual preview
ACK-109 BL
Brand: KeySonic Pages: 2
IRTrans IRTrans USB User Manual preview
IRTrans USB
Brand: IRTrans Pages: 16
Eleaf MELO 2 User Manual preview
MELO 2
Brand: Eleaf Pages: 2
Eleaf Icare Flask User Manual preview
Icare Flask
Brand: Eleaf Pages: 2
Fellowes Slimline Cordless Combo Quick Start preview
Slimline Cordless Combo
Brand: Fellowes Pages: 3
Partner KB-78M User Manual preview
KB-78M
Brand: Partner Pages: 14
Sequential Prophet-5 MIDI Operation Manual preview
Prophet-5 MIDI
Brand: Sequential Pages: 94
M-Audio eKeys49 User Manual preview
eKeys49
Brand: M-Audio Pages: 12
VAPOR4LIFE VAPOR TITAN User Manual preview
VAPOR TITAN
Brand: VAPOR4LIFE Pages: 2
Vapor Couture VC User Manual preview
VC
Brand: Vapor Couture Pages: 16
Vaporesso LUXE80 User Manual preview
LUXE80
Brand: Vaporesso Pages: 68
CYBEX CP-21072 Owner'S Manual preview
CP-21072
Brand: CYBEX Pages: 96

Brands by name

Popular brands

Load more brands