4
Driver installation procedure
Do not connect the DS-DAC-100/100m/10 to your computer before you’ve finished in-
stalling the driver. If you’ve already connected it, disconnect it; then reconnect it after
you’ve finished installing the driver.
Windows 7/8 users
The installation screens shown on your computer may differ somewhat depending on
your Windows version and system, but the procedure is the same. The explanation that
follows will show typical screens in Windows 7.
If, during installation, a message appeared to confirm whether or not to continue the in-
stallation, click [Install].
1
In the KORG AudioGate and DS-DAC Setup panel that you downloaded, click “Install
DS-DAC Driver” to start the installer. In the language selection menu, choose English;
click [OK].
2
The following dialog box will appear; click [Next >].