Korg drumlogue Owner'S Manual Download

Page: 56 / 59

Specifications

Polyphony:

11 voices (User synths may be played polyphonically via

MIDI, the actual voice count will depend on the synth's

implementation)

Sound source system:

Analog sound source x 4, Digital sound source x 6 (PCM

x 4, User sampling sound source x 2), Multi-sound source

(VPM, NOISE, User Synth)

Number of Programs (including rhythm patterns):

128 (64 preset programs by factory default)

Number of drum kits: 128 (64 preset kits by factory default)
Effects:

REVERB, DELAY, MASTER

Sequencer:

64 step x 11 parts

Display:

Organic EL (electro-luminescence) display

Control:

Fifteen dedicated panel controls that can instantaneously

access parameters

Input/Output terminals: Headphone jack, OUTPUT (L/MONO, R, AUDIO OUT1

to 4) jacks, SYNC IN/OUT jacks, AUDIO IN jack, MIDI

IN/OUT connectors, USB A (TO DEVICE) port, USB B (TO

HOST) port

Power supply:

AC adapter (DC9V,

)

Power consumption:

9 W

Operating temperature: 0°C - 40°C (non-condensing)

Dimensions (W × D × H):

317 × 189 × 73 mm/12.48” × 7.44” × 2.87”

Weight:

1.4 kg/3.09 lbs.

Included items:

AC adapter, Precautions, Quick Start Guide

* Specifications and appearance are subject to change without notice for improvement.

Summary of Contents for drumlogue




























































Search results

Summary of Contents for drumlogue

Reviews:

Related manuals for drumlogue

Brands by name

Popular brands

Korg drumlogue, Owner'S Manual

Search results

Summary of Contents for drumlogue

Reviews:

Related manuals for drumlogue

Brands by name

Popular brands