Korg Ci-8600, Owner'S Manual, Page: 63 / 112

63
Song
9
When you are finished, press the [EXIT] switch
The “Edit” page will appear. If you wish to check the results of your editing, save
the data in SMF format as described below, and then play it back.
If you press the [EXIT] switch once again before saving, the edited content
will be discarded, and you will return to the state before editing.
Saving an edited song as SMF data
If you wish to play the song you edited, you must save the song to floppy disk as SMF
data.
1
In the “Edit” page, press the “Save SMF” button
The “Save SMF” page will appear.
2
Rename the file
Press the “Rename” button, and rename the file. ( ☞ p.35)
If you save the file without changing its name, the original file will be over-
written. If you wish to keep the original file, you must change the filename
before saving, or save it on a different floppy disk.
3
Save the file to floppy disk
Insert a formatted floppy disk, and press the “Save” button to save the file on the
floppy disk.
To use GM programs
If you turn off the “Prog Bank” check box, program bank messages will not be writ-
ten. Turn off the “Prog Bank” check box if you do not want bank changes to occur
during playback.
4
Press the [EXIT] switch
The “SongPlay 2/3” page will appear.
5
Access the “SongPlay 1/3” page
Use the [PAGE
√
] switches to return to the “SongPlay 1/3” page.
6
Select the file that you saved in step 3
7
Play back the file
Press the SONG CONTROL [PLAY/STOP] switch to play back the song.
Renaming a song
Here’s how to change the song title.
1
In the “Edit” page, press the “Rename” button.
A screen will appear in which you can modify the song name.
2
Modify the song name
You can assign a song name of up to 16 characters.
When you are finished, press the “Return” button to return to the “Edit” page.