57
Song
5
Mute the part
Press the button for the part that you wish to mute (“1st,” “2nd,” or “Other”) to set
it to “Mute.”
“Other” will mute the parts of MIDI channels other than those you selected in step
3. Each time you press the button, the setting will alternate between “Mute”
→
“Play”
→
“Mute.”
Juke Box function
The Juke Box function lets you register up to eight SMF songs in the desired playback
order, and play them back in succession.
1
Insert a floppy disk
The “SongPlay 1/3” page will appear.
If a floppy disk is already inserted, press the [SONG] switch.
2
Access the “SongPlay 2/3” page
Press the [PAGE
®
] switch to access the “SongPlay 2/3” page.
3
Press the “JukeBox” button
The “JukeBox” page will appear.
4
Select the first song
Press the file name located in the lower left of the “JukeBox” page.
Use the dial or the [VALUE] switches to select the song file that will be played first.
5
Press the “Append” button
The file name will be registered at “1:” in the right side of the screen.
It is not possible to append during playback.
6
Add more songs
Repeat steps 4 and 5 to add songs in the desired playback order.
You can register up to eight songs.
If you make a mistake, use the “Remove” button to delete a song from the list.
7
Start playback
Press the SONG CONTROL [PLAY/STOP] switch.
The songs will play back in the registered order.
When one song finishes playing, it will be deleted from the list, and the next song
will play.
To exit the JukeBox function
To exit the JukeBox function, press the “Remove” button for all songs in the “Juke-
Box” list to delete them. Then press the [EXIT] switch.
If the “JukeBox” page list contains any songs, it is not possible to select songs
in the “SongPlay 1/3” page.
MeMO
Summary of Contents for Ci-8600
Page 1: ...2 E Owner s Manual...