Korg Ci-8600, Owner'S Manual, Page: 34 / 112

34
5
Finalize the program name
When you input the complete program name, press the “Return” button to return to
the previous screen.
Loading individual programs from a floppy disk
You can select an individual sound that you wish to use from the floppy disk, and load
it into the [USER/DISK] program group.
1
Press the PROGRAM GROUP [USER/DISK] switch
The contents of the currently-loaded [USER/DISK] program group will be dis-
played.
2
Press the “Load 1” button
The “Load 1 Prog” page will appear.
3
Insert the floppy disk
Insert the floppy disk containing the program you wish to load into the floppy disk
drive.
4
Select the copy source program file
Press the “File” cell located below “Source Disk.”
Use the dial or the [VALUE] switches to select the name of the file that contains the
program.
5
Select the copy source program
Press the “Prog.” cell located below “Source Disk.” Use the dial or the [VALUE]
switches to select the name of the program that you wish to copy.
In the case of a drum program, press the “Drum Prog” check box to turn it on. In this
case, there will be only two program names.
6
Select the copy destination program
Press the “Destination” cell, and select the copy destination within the [USER/
DISK] program group.
Use the dial or the [VALUE] switches.
7
Press the “Load” button
The program you selected in step 5 will be loaded into the Ci-9600/Ci-8600, and
you will return to the main screen.
Saving to a floppy disk
Here’s how the programs of the [USER/DISK] program group loaded into the Ci-
9600/Ci-8600 can be saved on a floppy disk.
1
Press the PROGRAM GROUP [USER/DISK] switch
A list of the currently-loaded [USER/DISK] program group will appear.
MeMO