
30
5. Playing along with the metronome
If you wish to play/Practice with an accurate tempo, it is convenient to use the metro-
nome. The metronome also sets the time signature and tempo when you record your
playing.
Sounding the metronome
1
Press the [METRONOME] switch
The [METRONOME] switch indicator will light, and the metronome will start.
To set the time signature
Press one of the “Meter” radio buttons to select a time signature.
The available time signatures are 1/4, 2/4, 3/4, 4/4, and 5/4.
If you select “1/4,” no accent (strong note) will sound.
To adjust the volume
Press the “Volume” cell, and use the dial or the [VALUE] switches to adjust the vol-
ume.
The volume range is 0 (minimum) – 127 (maximum).
Immediately after the power is turned on, the metronome will default to tempo “127,”
time signature (“Meter”) “4/4,” and volume “127.”
2
Return to the main screen
If the [DISPLAY HOLD] switch is on, press the [EXIT] switch to return to the main
screen.
Stopping the metronome
To stop the metronome, press the [METRONOME] switch once again.
The [METRONOME] switch indicator will turn off, and the metronome will stop.
Adjusting the tempo
Use the [TEMPO UP] or [TEMPO DOWN] switches to adjust the tempo that is dis-
played in the upper left of the main screen. You can also press the [TAP TEMPO]
switch to set the tempo.
The tempo range is
=40–240. (
MeMO
Summary of Contents for Ci-8600
Page 1: ...2 E Owner s Manual...