Korg Ci-8600, Owner'S Manual, Page: 23 / 112

23
Playing
2. Combining programs
Layer function (play two sounds together)
This allows you to combine two programs to be played together when you play a sin-
gle note. This is called the Layer function.
1
Press the [LAYER] switch
The [LAYER] switch indicator will light, and the “Layer” page will appear.
2
Select the two programs
To select the “Upp1” program, press cell A. To select the “Upp2” program, press cell
B. Then select the desired sound.
☞
p.21 “1. Selecting sounds”
The total polyphony is 32 notes. When you select two sounds such as “Grand Piano
1,”and Strings the polyphony will be 21 notes.
☞ p.91 “Troubleshooting”
3
Adjust the volume balance of the two sounds
Use the dial or the [VALUE] switches to adjust the value of the “Vol” (volume) cell.
The volume can be adjusted from 0 (minimum) – 127 (maximum).
4
Specify the octave of each sound
The pitch played by the keyboard can be adjusted for each program in one-octave
steps.
Use the “Octave” cell “
▲ ” or “ ▼ ” to set the value.
The octave can be adjusted over a range of –2, –1, 0, +1, +2.
B A
Upp2
Upp1
MeMO