Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 645/1568
6.28
UDLD Commands
6.28.1
Show command
6.28.1.1
show udld
Show UDLD information in all interfaces or specific interface
Syntax
show udld {unit/slot/port}
Default Setting
None
Command Mode
Privileged Exec
Display Message
Port enable operational state:
Specifies the Port Enable Operational State of the selected port.
Current bidirectional state:
Specifies the Bidirectional State of the selected port.
Current operational state:
Specifies the runtime Operational State of the selected port. This
section will be hidden if the port doesn't enable udld.
Message interval:
Specifies the runtime Message Interval of the selected port. This section will be
hidden if the port doesn't enable udld.
Timeout interval:
Specifies the runtime Timeout Interval of the selected port. This section will be
hidden if the port doesn't enable udld.
Remote Entry:
Display all the remote entry information if received.
Expiration time:
Specifies the runtime Expiration Time of the remote entry.
Device ID:
Specifies the Device Id associated with the remote system.
Device Name:
Specifies the Device Name associated with the remote system.
Port ID:
Specifies the Port Id associated with the remote system.
Neighbor echo device:
Specifies the Device Id included in Echo TLV associated with the remote
system.
Neighbor echo port:
Specifies the port Id included in Echo TLV associated with the remote system.
Message interval:
Specifies the Message Interval associated with the remote system.
Timeout interval:
Specifies the Message Interval associated with the remote system.
CDP Device Name:
Specifies the CDP Device Name associated with the remote system.
