Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 614/1568
i
6.23.2
Configuration Commands
6.23.2.1
ipv6 access-list
This command creates an IPv6 Access Control List (ACL) identified by <name>, consisting of
classification fields defined for the IP header of an IPv6 frame. The <name> parameter is a
case-sensitive alphanumeric string from 1 to 31 characters
uniquely identifying the IPv6 access list.
If an IPv6 ACL by this name already exists, this command enters IPv6-Access-List config mode to allow
updating the existing IPv6 ACL.
Syntax
ipv6 access-list <name>
no ipv6 access-list <name>
<name>
- access-list name up to 31 characters in length.
no -
This command deletes the IPv6 ACL identified by <name> from the system.
The CLI mode changes to IPv6-Access-List Config mode when you successfully execute this
command.
Default Setting
None
Command Mode
Global Config
