Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 295/1246
6.7.2
Configuration Commands
6.7.2.1
username
This command adds a new user (account) if space permits. The account <username> can be up to eight
characters in length. The name may be comprised of alphanumeric characters as well as the dash (
‘-’)
and underscore (
‘_’). The <username> is not case-sensitive. Six user names can be defined.
This command changes the password of an existing operator. User password should not be more than
eight characters in length. If a user is authorized for authentication or encryption is enabled, the
password must be eight alphanumeric characters in length. The username and password are not
case-sensitive. W hen a password is changed, a prompt will ask for the op
erator’s former password. If
none, press enter.
Syntax
username <username> {password <0|7> <password> | nopassword}
no username <username>
<username> -
is a new user name (Range: up to 8 characters).
<0|7> -
0 means the password is plain-text. 7 means the password is encrypted.
no -
This command removes a user name created before.
nopassword -
This command sets the password of an existing operator to blank. When a password
is changed, a prompt will ask for the operator's former password. If none, press enter.
i
The admin user account cannot be deleted.
Default Setting
No password
Command Mode
Global Config
