Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 147/1246
6.2.10
Port Channel
6.2.10.1
show port-channel
This command displays the static capability of all port-channels (LAGs) on the device as well as a
summary of individual port-channels.
Syntax
show port-channel brief
Default Setting
None
Command Mode
Privileged Exec
Display Message
For each port-channel the following information is displayed:
Logical Interface:
The field displays logical slot and the logical port.
Port-Channel Name:
This field displays the name of the port-channel.
Link State:
This field indicates whether the link is up or down.
Trap Flag:
This object determines whether or not to send a trap when link status changes. The
factory default is enabled.
Type:
This field displays the status designating whether a particular port-channel (LAG) is statically
or dynamically maintained. The possible values of this field are Static, indicating that the
port-channel is statically maintained; and Dynamic, indicating that the port-channel is dynamically
maintained.
Mbr Ports:
This field lists the ports that are members of this port-channel, in slot/port notation.
Active Ports:
This field lists the ports that are actively participating in this port-channel.
This command displays an overview of a specificed port-channel (LAG) on the switch.
Syntax
show port-channel <logical slot/port>
<logical slot/port> -
The port-channel interface number.
Default Setting
