EDITION NO. : KA1S20201702R3
- Brake adjustment
NO
NO
1
5
2
6
3
7
4
8
• As air hoist operaties (as compressed air is supplied);
Brake cam(4) connected with the control valve of valve case rotates and pushes the brake adjust plate(3). It causes
the brake pad(7) disconnect the brake wheel(8). And air hoist will operate.
• As air hoist stops (as compressed air is stops);
The control valves lever will be in neutral position and the brake cam(4) returns to its own location. And then, the
brake pad(7) and the brake wheel(8) will be contracted. As a result, air hoist will stop. Under a rated loads, the
brake does not have any slip in accordance with the brake adjustment.
① Loose the brake setting bolt(1) and the brake
Brake Adjust Plate
Brake Pad
Brake Setting Nut
ACCESSORY NAME
Brake Cam
KA1S - SERIES
NAME
NAME
Brake Adjust Bolt
Brake Shoe
Brake Adjust Rock Nut
Brake Wheel
고려호이스트
7
① Loose the brake setting bolt(1) and the brake
setting nut(2).
② Loose the brake adjust fixing nut(6).
③ Make sure the brake adjustment plate(3) to contact
the brake shoe(5).
④ Tighten the brake setting bolt(1) and the nut(2).
⑤ Adjust the clearance between the brake adjustment
plate(3) and the brake cam(4) of 0.5~1mm as
shown.
⑥ Make sure the brake pad(7) and the brake wheel
evenly and completely contacted.
⑦ Tighten the brake adjustment fixing nut, after checks.
Note : Tighten the nut after fixing the brake
adjustment plate.
7
