xBP-6E2P3
2U high performance PICMG 1.3 Backplane
Quick REFERENCE
Version 1.3
Board Rev.
0
First Level Debugging
1. If ATX +12V power supply is used on SHB, make sure that the +12V power cable (J19) is
conected in SHB and +12V power supply cable mated in J17.
2. Remove all peripheral boards and SBCs.
3. Remove all cables from backplane.
4. Make sure that all the Power Good LEDs are on.
Connectors
J1-3: PCI Connector
J31-32: USB
J 5: PICMG Connector
J33+34: SATA
J 21: PCIeX16 Connector J36: PWR button
J 22: PCIe x1 Connector
J37: Reset button
J30+38: ATX Connector
J 22
J 5
J 38
J 30
J36 J27 J34 J33 J32 J31
J3
J2
J1
J21
