ID 29867.06, Rev. 01
© 2007 Kontron Modular Computers GmbH
P R E L I M I N A R Y
29867
.06_01.VC.070319/151308
Page 27
ThinkIO
™
- P
PROGRAMMING ASSISTANCE GUIDE
CoDeSys PLC
6.6
Setting Up the Gateway Server for Communication
Any time it is necessary to communicate with a ThinkIO-P (e.g to download a project) a gateway
server is required to be operating using preselected communication parameters. When needed,
the gateway server will be started automatically (if not already running) by the CoDeSys IDE.
Before the gateway server can communicate with the ThinkIO-P, however, certain parameters
must be set. This is accomplished as follows.
PROCEDURE START
: Setting up the communication parameters
1. Select
Online
, then click
Communication parameters
