Kontron speedMOPSlcdCE, User Manual

Page: 74 / 99

KONTRON
Appendix B: BIOS Operation 66 speedMOPSlcdCE User’s Guide
24.4.9.
Watchdog Timer Settings Submenu
Feature Option Description
Mode Disabled
Reset
NMI
Select watchdog-timer
operational mode.
Delay 1s, 5s, 10s, 30s , 1min, 5.5min,
10.5min, 30.5min
The time until the watchdog timer
counter starts counting. Useful to
handle longer boot times.
Timeout 1s, 5s, 10s, 30s , 1min, 5.5min,
10.5min, 30.5min
Max. trigger period.
Note : In the Option column, bold shows default settings.
24.4.10.
Display Control Submenu
Feature Option Description
Display Mode CRT only
LCD only
CRT+LCD
Select display mode.
JDA Revision x.x Displays the revision of the JILI data area image.
Flat Panel Type VGA *
SVGA *
XGA *
XGA2 *
SXGA *
Enter PAID
Enter FPID
Auto
Select Auto to let the BIOS automatically detect the panel
type or use one of the predefined fixed panel types.
Choose Enter PAID or Enter FPID
to manually set JILI3 ID values.
PAID/FPID ** 0 – FFFF, default 0 Enter the JILI3 ID.
Flat Panel
Backlight ***
0 – 255, default
128
Enter a value to adjust backlight of the LCD.
Flat Panel
Contrast ****
0 – 63, default 32 Enter a value to adjust contrast of the LCD.
Note: In the Option column, bold shows default settings .
(*) Standard timings for VGA to SXGA panels cannot drive all available
displays of that type that are on the market. Use a JILI cable whenever
possible.
(**) Only visible if Enter PAID or Enter FPID are selected.
(***) Only visible if the panel adapter is equipped with a MAX5362 DAC for
backlight control.
(****) Only visible if the panel adapter is equipped with a Xicore X9429 digital
potentiometer for contrast control.