Kontron speedMOPSlcdCE, User Manual

Page: 67 / 99

KONTRON
speedMOPSlcdCE User’s Guide 59 Appendix B:BIOS Operation
24.3.1.
Master or Slave Submenus
Feature Option Description
Type None
User
Auto
CD-ROM
IDE Removable
ATAPI Removable
Other ATAPI
None = Autotyping is not able to supply the drive
type or end user has selected None, disabling any
drive that may be installed.
User = End user supplies HDD information.
Auto = Autotyping. The drive itself supplies the
information.
CD-ROM = CD-ROM drive.
ATAPI Removable = Read- and writeable media
e.g. LS120 and USB-ZIP
Other ATAPI = for ATAPI devices not supported by
other HDD features.
Cylinders 1 to 65,536 Number of cylinders.
Heads 1 to 256 Number of read/write heads.
Sectors 1 to 63 Number of sectors per track.
Maximum Capacity N/A Displays the calculated size of the drive in CHS.
Total Sectors N/A Number of total sectors in LBA mode.
Maximum Capacity N/A Displays the calculated size of the drive in LBA.
Multi-Sector Transfer Disabled
2 sectors
4 sectors
8 sectors
16 sectors
Any selection except Disabled determines the
number of sectors transferred per block.
The standard is one sector per block.
LBA Mode Control Disabled
Enabled
Enabling LBA causes Logical Block Addressing to
be used in place of CHS.
32-Bit I/O Disabled
Enabled
Enables 32-bit communication between CPU and
IDE card. Requires PCI or local bus.
Transfer Mode Standard
Fast PIO 1
Fast PIO 2
Fast PIO 3
Fast PIO 4
FPIO 3 / DMA 1
FPIO 4 / DMA 2
Selects the method for transferring the data
between the hard disk and system memory.
Ultra DMA Mode * Disabled
MODE 0
MODE 1
MODE 2
Selects the UDMA mode to move data to/from the
drive. Autotype the drive to select the optimum
transfer mode. This feature is autodetected.
SMART Monitoring Disabled
Enabled
Shows whether a disk supports SMART.
Note: In the Option column, bold shows default settings.
(*) The board only supports up to UDMA33. This is a limitation from the
44pin IDE interfaces.