KONTRON
Specifications
10
speedMOPSlcdCE User’s Guide
4.3
Electrical Specifications
4.3.1.
Supply Voltage
+5V DC +/- 5%
4.3.2.
Supply Voltage Ripple
100mV peak to peak 0 - 20MHz
4.3.3.
Supply Current (typical)
The speedMOPSlcdCE is equipped with power-saving features. Different power-consumption tests
were executed to give an overview of the electrical conditions for several operational states. The
board used a 256MB SDRAM module for test results shown below. An attached hard disk was not
supplied through the measurement path, and there was no extension module in the system.
speedMOPSlcdCE 400MHz
Operational State
@ +5V
DOS Prompt
2.60A
DOS Standby
2.02A
Windows Idle
2.12A
Windows 3D performance
3.03A
Windows 100% CPU Load
2.44A
speedMOPSlcdCE 733MHz
Operation State
@ +5V
DOS Prompt
3.28A
DOS Standby
2.30A
Windows Idle
2.38A
Windows 3D performance
3.84A
Windows 100% CPU Load
3.31A
speedMOPSlcdCE 1GHz
Operational State
@ +5V
DOS Prompt
3.83A
DOS Standby
2.47A
Windows Idle
2.55A
Windows 3D performance
4.49A
Windows 100% CPU Load
3.89A
Summary of Contents for speedMOPSlcdCE
