SMARC-sAL28 User Guide. Rev. 1.0
// 18
Display
Display port as standard option, FHD (1920x1080) and UHD (3840x2160)
Optional: Dual channel LVDS up to 1920x1200 with NXP PTN3460I
SD-Card
1x SDIO
UART
SER0 with RTC/CTS hardware flow control to CPU
SER1, SER2 RX/TX
Serial Peripheral
Interface (SPI0)
One chip select available at standard module
Optional: second chip select possible with abandonment of USB3 power control from CPU
eSPI/SPI1
XSPI_A with CS0#, CS1# – CS0# to module SPI-flash (default)
Optional: CS0# to edge Connector (for Carrier uboot booting without SPI flash on module)
ALERT0#, ALERT1#, SPI_RESET# from CPLD
GPIO
12 GPIOs
CAN
1x CAN
Optional: Second CAN interface with abandonment of one I2C interface
Power
Consumption
Maximum Power consumption of the board is estimated to 15 W
Input Voltage
Wide range VCC 3.0
V to 5.25
V
vripple_p-p (0-20 MHz) = 200 mV 0.1 – 20 ms input voltage rise ramp to 10% nominal VCC
Miscellaneous
Panel Signal
Display Port
Optional: dual channel LVDS or eDP
Features On
Request
2x PCIe x2 or 1x PCIe x4 configuration
eMMC 5.1 Flash onboard up to 64 GByte pSLC, up to 128 GByte (MLC)
Dual Channel LVDS or eDP instead of DP
3.2.
Environmental Conditions
Table 5: Environmental Conditions
Operating
industrial: -40°C to 85°C
relative humidity (non-condensing) 10
%
to 93% at 40°C (acc. to IEC 60068-2-78)
Storage
industrial grade: -40°C to +85°C
relative humidity (non-condensing) 10 % to 93 % at 40°C (acc. to IEC 60068-2-78)
Electromagnetic
Compatibility
(EMC)
according to
EN 55032:2015 Electromagnetic compatibility of multimedia equipment - Emission
requirements (CISPR 32:2015); German version EN 55032:2015
EN 55024:2010 + A1:2015 Information technology equipment - Immunity
characteristics - Limits and methods of measurement (CISPR 24:2010 + Cor.:2011 +
A1:2015); German version EN 55024:2010 + A1:2015
CE
CE according to
EN62368-1:2014 + AC:2017
EN610000-6-3:2007 + A1:2011
CISPR 32: Edition 1.0 2012-01, class B, 1-6 GHz
EN55032:2015
EN55024:2010 + A1:2015
UL
according to IEC 62368-1 (ed.2)
Shock
Pulse: half sinus
Period: 11 ms
Acceleration: 15 g
Cycles: three shocks per axis, three axes
Summary of Contents for SMARC-sAL28
Page 1: ...USER GUIDE 1 SMARC sAL28 Doc Rev 1 0 Doc ID 1064 6120...
Page 2: ...SMARC sAL28 Rev 1 0 www kontron com 2 This page has been intentionally left blank...
Page 22: ...SMARC sAL28 User Guide Rev 1 0 www kontron com 22 Figure 4 Bottom View 3 Product label 3...
Page 28: ...SMARC sAL28 User Guide Rev 1 0 www kontron com 28...
