Kontron RMX-1U15L, User Manual, Page: 39 / 73

Setting up the Monitor 1-15 RMX-1U15L and RMX-9U15L User’s Guide
M
oni
to
r S
etup
Whenever you change the resolution, color, or refresh rate, the image size, position, or shape
may change. This behavior is normal. You can readjust the image using the monitor on-screen
controls. For more information on the monitor on-screen controls, refer to Chapter 2. For more
information on configuring the display settings, refer to the manual that came with your video
card.
ä
ä ä
ä
Connecting the Monitor
To connect an RMX-1U15L(/RT) or RMX-9U15L(/RT) monitor to a computer, perform the
following steps:
1) Turn off your computer. You should always turn off your computer before connecting or
disconnecting a device.
2) Connect the monitor’s video (VGA) cable to the video card connector on the back of your
computer (Figure 1-11).
3) If a touchscreen model, connect the touchscreen cable to the serial (COM) port on the
back of your computer (Figure 1-11). If the COM port on the back of the computer is a
25-pin connector, use a 9-pin to 25-pin adapter (not included) to connect the
touchscreen cable to the computer.