MUNGO560
MUNGO560
1
J4
J1
1
North Bridge
Jumpers
Introduction
JUMPER SETTINGS
(* = Default Setting)
JUMPER SETTINGS
(* = Default Setting)
LCD Power Selection (J1)
1,2
<+5V for LCD Power>
2,3
<+3V for LCD Power>
RTC CMOS Clear (J4)
1-2
Normal Operation
2-3
Clear CMOS Contents
*
1
*
2.
After installing the processor and memory, install the board into a chassis.
Connect the Power (J37) and HDD (J7) LEDs, t he Power On (J14) and Reset (J13) switches,
and Speaker (J21) to the system interface connectors. (See the Connector Diagram on the next page.)
3.
4.
Connect all other devices such as the IDE, USB and Ethernet. (See the Connector Diagram on the next page.)
5.
Connect power from the power supply to the power input connector (J37).
NOTE: Standard power supply conversion cables are available. Please let us know your needs.
MUNGO560 Jumper Locations
1.
Carefully remove your SBC from the packaging and set it on an ESD-protected work area.
This Quick Reference Card provides jumper and connector locations (next page)
to help you get your system running quickly. For complete connector
pinout information, please download the MUNGO560 manual from the Kontron Web site.
South Bridge
CPU
PN 932-0039-00-B
