MSH8900
www.symkloud.com
// 48
ShMC CLI (serial, SSH)
ipmitool> set targetaddr
<ipmi address>
Note
To break the connection and go back to the initial component, reestablish a connection with the
initial component.
3.4.
Configuring Shelf Managers
3.4.1.
Set Up Access to the ShMC
To access the ShMC CLI using the Ctrl+g 0 command (Figure 14 or Figure 15):
1.
2.
Release both keys
3.
4.
Press the Enter key and release it
Hint: It is preferable to use the Ctrl key located on the left of the keyboard.
Log in to the ShMC CLI using the default credentials user: admin and password: admin.
COMMAND
PURPOSE
Ctrl+g 0
MSH8900 Login:
admin
Password:
admin
ipmitool>
Use HOTKEY to redirect the serial console
multiplexer to the ShMC CLI.
The ipmitool> prompt means the ShMC was
reached.
Summary of Contents for MSH8900
Page 1: ... USER GUIDE MSH8900 ...
Page 12: ...MSH8900 www symkloud com 12 1 2 Block Diagram Figure 5 Block diagram of an MS2900 ...
Page 14: ...MSH8900 www symkloud com 14 Figure 7 Port mapping of an MS2900 platform ...
Page 16: ...MSH8900 www symkloud com 16 Figure 8 Port mapping in MS1300 platforms ...
