mITX-SSH-S - User Guide, Rev. 1.0
// 66
Jumper 1 Position
Description
Pin 1-3
Pin 3-5
X
-
Backlight Power = +12V
-
X
Backlight Power = +5V
Jumper 2 Position
Description
Pin 2-4
Pin 4-6
X
-
Panel Power = +3.3V
-
X
Panel Power = +5V
“X” = Jumper set (short) and “-” = jumper not set (open)
7.20.10.
Pin-9 Selection for COM1 (JP12)
Figure 43: Pin-9 Selection JP12
Table 56: Pin Assignment JP12
Jumper 1 Position
Description
Pin 1-2
Pin 2-3
Pin 3-4
Pin 4-5
X
-
-
-
COM1, Pin-9 = +12V
-
X
-
-
COM1, Pin-9 = +5V
-
-
X
-
COM1, Pin-9 = +5V
-
-
-
X
COM1, Pin-9 = RI
“X” = Jumper set (short) and “-” = jumper not set (open)
7.20.11.
ME F/W Selection (JP13)
Figure 44: ME F/W Selection JP13
Table 57: Pin Assignment JP13
Jumper Position
Description
Pin 1-2
X
Security Measures Defined by BIOS are Over-written
-
Security Measures Defined are Set
