manualshive.com logo in svg

Kontron KISS Oil & Gas 2U, User Manual, Page: 36 / 52

Share
Download
Kontron KISS Oil & Gas 2U User Manual Download Page 36

KISS 

Oil & Gas

 

2U User’s Manual 

8.5.

 Adding System Memory 

Fig. 25: Memory cards with memory hold down bracket   

The  KTQ77/FLEX  motherboard  has  four  DDR3  UDIMM  sockets.  The  sockets  support  the  following  memory 
features: 

»

 

4x DDR3 1.5V UDIMM 240-pin 

»

 

Dual-channel with 2 UDIMM per channel 

»

 

Single/dual rank unbuffered 1333/1600MT/s (PC3-10600/PC3-

12800)  The supported 2

nd 

Generation Core i5 support 

1066/1333 MT/s 

From 1GB and up to 4x 8GB. 

Note: Less than 4GB displayed in System Properties using 

32bit OS  (Shared Video Memory/PCI resources is subtracted) 

»

 

SPD timings supported 

»

 

ECC not supported 

The installed DDR3 DIMM should support the Serial Presence Detect (SPD) data structure. This 
allows  the  BIOS  to  read  and  configure  the  memory controller  for  optimal  performance.  If  non-
SPD  memory  is  used,  the  BIOS  will  attempt  to  configure  the  memory  settings,  but 
performance and  reliability may be  impacted. 

Steps for Inserting/Removing Memory 

1.

Unscrew  memory  protection  bracket  from  the  chassis  side  wall  by  unscrewing  the  two
screws on the memory hold down bracket (see figure 25)

2.

Insert and attach the memory cards to the motherboard.

3.

Reattach the memory card hold down bracket.

36

www.kontron.com 

Summary of Contents for KISS Oil & Gas 2U





















































Reviews:

No comments